Re: [PATCH 1/3] arm64: dts: qcom: hk10: use "okay" instead of "ok"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 07/11/2022 10:29, Robert Marko wrote:
Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
  arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 16 ++++++++--------
  1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index db4b87944cdf..262b937e0bc6 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -22,7 +22,7 @@ memory {
  };
&blsp1_spi1 {
-	status = "ok";
+	status = "okay";
flash@0 {
  		#address-cells = <1>;
@@ -34,33 +34,33 @@ flash@0 {
  };
&blsp1_uart5 {
-	status = "ok";
+	status = "okay";
  };
&pcie0 {
-	status = "ok";
+	status = "okay";
  	perst-gpios = <&tlmm 58 0x1>;
  };
&pcie1 {
-	status = "ok";
+	status = "okay";
  	perst-gpios = <&tlmm 61 0x1>;
  };
&pcie_phy0 {
-	status = "ok";
+	status = "okay";
  };
&pcie_phy1 {
-	status = "ok";
+	status = "okay";
  };
&qpic_bam {
-	status = "ok";
+	status = "okay";
  };
&qpic_nand {
-	status = "ok";
+	status = "okay";
nand@0 {
  		reg = <0>;



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux