[PATCH v2 5/6] clk: ingenic: Add X1000 audio clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The X1000's CGU supplies the I2S system clock to the AIC module
and ultimately the audio codec, represented by the "i2s" clock.
It is a simple mux which can either pass through EXCLK or a PLL
multiplied by a fractional divider (the "i2s_pll" clock).

The AIC contains a separate 1/N divider controlled by the I2S
driver, which generates the bit clock from the system clock.
The frame clock is always fixed to 1/64th of the bit clock.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
v1 -> v2:
* Fix I2SCDR1 refresh to ensure the register is properly initialized
  and we don't rely on the reset value. Since the I2SDIV_D field can
  be automatically calculated by the hardware we don't need to provide
  it, writing 0 triggers the auto calculation.
* Remove redundant -1 entries from parent clocks.

 drivers/clk/ingenic/x1000-cgu.c | 70 +++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b2ce3fb83f54..95d5e3a44cee 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -8,6 +8,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/rational.h>
 
 #include <dt-bindings/clock/ingenic,x1000-cgu.h>
 
@@ -168,6 +169,38 @@ static const struct clk_ops x1000_otg_phy_ops = {
 	.is_enabled	= x1000_usb_phy_is_enabled,
 };
 
+static void
+x1000_i2spll_calc_m_n_od(const struct ingenic_cgu_pll_info *pll_info,
+			 unsigned long rate, unsigned long parent_rate,
+			 unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+	const unsigned long m_max = GENMASK(pll_info->m_bits - 1, 0);
+	const unsigned long n_max = GENMASK(pll_info->n_bits - 1, 0);
+	unsigned long m, n;
+
+	rational_best_approximation(rate, parent_rate, m_max, n_max, &m, &n);
+
+	/* n should not be less than 2*m */
+	if (n < 2 * m)
+		n = 2 * m;
+
+	*pm = m;
+	*pn = n;
+	*pod = 1;
+}
+
+static void
+x1000_i2spll_set_rate_hook(const struct ingenic_cgu_pll_info *pll_info,
+			   unsigned long rate, unsigned long parent_rate)
+{
+	/*
+	 * Writing 0 causes I2SCDR1.I2SDIV_D to be automatically recalculated
+	 * based on the current value of I2SCDR.I2SDIV_N, which is needed for
+	 * the divider to function correctly.
+	 */
+	writel(0, cgu->base + CGU_REG_I2SCDR1);
+}
+
 static const s8 pll_od_encoding[8] = {
 	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
 };
@@ -319,6 +352,37 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR, 25 },
 	},
 
+	[X1000_CLK_I2SPLLMUX] = {
+		"i2s_pll_mux", CGU_CLK_MUX,
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL },
+		.mux = { CGU_REG_I2SCDR, 31, 1 },
+	},
+
+	[X1000_CLK_I2SPLL] = {
+		"i2s_pll", CGU_CLK_PLL,
+		.parents = { X1000_CLK_I2SPLLMUX },
+		.pll = {
+			.reg = CGU_REG_I2SCDR,
+			.rate_multiplier = 1,
+			.m_shift = 13,
+			.m_bits = 9,
+			.n_shift = 0,
+			.n_bits = 13,
+			.calc_m_n_od = x1000_i2spll_calc_m_n_od,
+			.set_rate_hook = x1000_i2spll_set_rate_hook,
+		},
+	},
+
+	[X1000_CLK_I2S] = {
+		"i2s", CGU_CLK_MUX,
+		.parents = { X1000_CLK_EXCLK, -1, -1, X1000_CLK_I2SPLL },
+		/*
+		 * NOTE: the mux is at bit 30; bit 29 enables the M/N divider.
+		 * Therefore, the divider is disabled when EXCLK is selected.
+		 */
+		.mux = { CGU_REG_I2SCDR, 29, 2 },
+	},
+
 	[X1000_CLK_LCD] = {
 		"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
 		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL },
@@ -426,6 +490,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR, 9 },
 	},
 
+	[X1000_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK },
+		.gate = { CGU_REG_CLKGR, 11 },
+	},
+
 	[X1000_CLK_UART0] = {
 		"uart0", CGU_CLK_GATE,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
-- 
2.38.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux