Hi,
On 21/10/2022 20:18, Rahul T R wrote:
Add support for wrapper settings for DSI bridge on
j721e. Also set the DPI input to DPI0
I think a few more words on the HW layout would be nice. What does the
wrapper do and how is it connected to the DSS.
Signed-off-by: Rahul T R <r-ravikumar@xxxxxx>
---
drivers/gpu/drm/bridge/cadence/Kconfig | 10 ++++
drivers/gpu/drm/bridge/cadence/Makefile | 1 +
.../gpu/drm/bridge/cadence/cdns-dsi-core.c | 37 +++++++++++++-
.../gpu/drm/bridge/cadence/cdns-dsi-core.h | 13 +++++
.../gpu/drm/bridge/cadence/cdns-dsi-j721e.c | 51 +++++++++++++++++++
.../gpu/drm/bridge/cadence/cdns-dsi-j721e.h | 18 +++++++
6 files changed, 129 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.c
create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.h
diff --git a/drivers/gpu/drm/bridge/cadence/Kconfig b/drivers/gpu/drm/bridge/cadence/Kconfig
index 8fbb46c66094..663a02d96420 100644
--- a/drivers/gpu/drm/bridge/cadence/Kconfig
+++ b/drivers/gpu/drm/bridge/cadence/Kconfig
@@ -36,3 +36,13 @@ config DRM_CDNS_DSI
help
Support Cadence DPI to DSI bridge. This is an internal
bridge and is meant to be directly embedded in a SoC.
+
+if DRM_CDNS_DSI
+
+config DRM_CDNS_DSI_J721E
+ bool "J721E Cadence DPI/DSI wrapper support"
+ default y
+ help
+ Support J721E Cadence DPI/DSI wrapper. This wrapper adds
+ support to select which DPI input to use for the bridge.
I'm not sure if the above is quite necessary here. If I understand
right, there's only one way on J721E to mux the DPI signal going to the
DSI. If you write "adds support to select DPI input" it sounds like
there's something to select, and this config somehow enables that
selection for the user.
Perhaps instead just say something like "Support J721E Cadence DPI/DSI
wrapper. The wrapper manages the routing of the DSS DPI signal to the
Cadence DSI.", or something along those lines.
Also, you say "DPI/DSI wrapper". How does this wrap DPI? Isn't this just
a DSI wrapper?
+endif
diff --git a/drivers/gpu/drm/bridge/cadence/Makefile b/drivers/gpu/drm/bridge/cadence/Makefile
index e3d8e9a40784..4cffc8ff71c4 100644
--- a/drivers/gpu/drm/bridge/cadence/Makefile
+++ b/drivers/gpu/drm/bridge/cadence/Makefile
@@ -4,3 +4,4 @@ cdns-mhdp8546-y := cdns-mhdp8546-core.o cdns-mhdp8546-hdcp.o
cdns-mhdp8546-$(CONFIG_DRM_CDNS_MHDP8546_J721E) += cdns-mhdp8546-j721e.o
obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
cdns-dsi-y := cdns-dsi-core.o
+cdns-dsi-$(CONFIG_DRM_CDNS_DSI_J721E) += cdns-dsi-j721e.o
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
index cba91247ab26..4b7de38ef1b0 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
@@ -15,12 +15,16 @@
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include "cdns-dsi-core.h"
+#ifdef CONFIG_DRM_CDNS_DSI_J721E
+#include "cdns-dsi-j721e.h"
+#endif
static inline struct cdns_dsi *input_to_dsi(struct cdns_dsi_input *input)
{
@@ -265,6 +269,10 @@ static void cdns_dsi_bridge_disable(struct drm_bridge *bridge)
val = readl(dsi->regs + MCTL_MAIN_EN) & ~IF_EN(input->id);
writel(val, dsi->regs + MCTL_MAIN_EN);
+
+ if (dsi->platform_ops && dsi->platform_ops->disable)
+ dsi->platform_ops->disable(dsi);
+
pm_runtime_put(dsi->base.dev);
}
@@ -360,6 +368,9 @@ static void cdns_dsi_bridge_enable(struct drm_bridge *bridge)
if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0))
return;
+ if (dsi->platform_ops && dsi->platform_ops->enable)
+ dsi->platform_ops->enable(dsi);
+
mode = &bridge->encoder->crtc->state->adjusted_mode;
nlanes = output->dev->lanes;
@@ -800,6 +811,8 @@ static int cdns_dsi_drm_probe(struct platform_device *pdev)
goto err_disable_pclk;
}
+ dsi->platform_ops = of_device_get_match_data(&pdev->dev);
+
val = readl(dsi->regs + IP_CONF);
dsi->direct_cmd_fifo_depth = 1 << (DIRCMD_FIFO_DEPTH(val) + 2);
dsi->rx_fifo_depth = RX_FIFO_DEPTH(val);
@@ -835,14 +848,27 @@ static int cdns_dsi_drm_probe(struct platform_device *pdev)
dsi->base.dev = &pdev->dev;
dsi->base.ops = &cdns_dsi_ops;
+ if (dsi->platform_ops && dsi->platform_ops->init) {
+ ret = dsi->platform_ops->init(dsi);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "platform initialization failed: %d\n",
+ ret);
+ goto err_disable_runtime_pm;
+ }
+ }
+
ret = mipi_dsi_host_register(&dsi->base);
if (ret)
- goto err_disable_runtime_pm;
+ goto err_deinit_platform;
clk_disable_unprepare(dsi->dsi_p_clk);
return 0;
+err_deinit_platform:
+ if (dsi->platform_ops && dsi->platform_ops->exit)
+ dsi->platform_ops->exit(dsi);
+
err_disable_runtime_pm:
pm_runtime_disable(&pdev->dev);
@@ -857,6 +883,10 @@ static int cdns_dsi_drm_remove(struct platform_device *pdev)
struct cdns_dsi *dsi = platform_get_drvdata(pdev);
mipi_dsi_host_unregister(&dsi->base);
+
+ if (dsi->platform_ops && dsi->platform_ops->exit)
+ dsi->platform_ops->exit(dsi);
+
pm_runtime_disable(&pdev->dev);
return 0;
@@ -864,6 +894,11 @@ static int cdns_dsi_drm_remove(struct platform_device *pdev)
static const struct of_device_id cdns_dsi_of_match[] = {
{ .compatible = "cdns,dsi" },
+#ifdef CONFIG_DRM_CDNS_DSI_J721E
+ { .compatible = "ti,j721e-dsi",
+ .data = &dsi_ti_j721e_ops,
+ },
I find the above formatting a bit odd. I think this should do fine:
{ .compatible = "ti,j721e-dsi", .data = &dsi_ti_j721e_ops, },
If you want multi-line, then I think the opening { should be on its own
line, similarly to the closing }.
+#endif
{ },
};
MODULE_DEVICE_TABLE(of, cdns_dsi_of_match);
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h
index 65cc77f19b39..37568b547fbe 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h
@@ -439,9 +439,22 @@ struct cdns_dsi_input {
struct drm_bridge bridge;
};
+struct cdns_dsi;
+
+struct dsi_platform_ops {
+ int (*init)(struct cdns_dsi *dsi);
+ void (*exit)(struct cdns_dsi *dsi);
I don't think init and exit are the opposites, but rather init and
deinit/uninit.
+ void (*enable)(struct cdns_dsi *dsi);
+ void (*disable)(struct cdns_dsi *dsi);
+};
+
struct cdns_dsi {
struct mipi_dsi_host base;
void __iomem *regs;
+#ifdef CONFIG_DRM_CDNS_DSI_J721E
+ void __iomem *j721e_regs;
+#endif
+ const struct dsi_platform_ops *platform_ops;
struct cdns_dsi_input input;
struct cdns_dsi_output output;
unsigned int direct_cmd_fifo_depth;
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.c
new file mode 100644
index 000000000000..b5216acb333e
--- /dev/null
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI j721e Cadence DSI wrapper
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Rahul T R <r-ravikumar@xxxxxx>
+ */
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "cdns-dsi-j721e.h"
+
+#define DSI_WRAP_REVISION 0x0
+#define DSI_WRAP_DPI_CONTROL 0x4
+#define DSI_WRAP_DSC_CONTROL 0x8
+#define DSI_WRAP_DPI_SECURE 0xc
+#define DSI_WRAP_DSI_0_ASF_STATUS 0x10
+
+#define DSI_WRAP_DPI_0_EN BIT(0)
+#define DSI_WRAP_DSI2_MUX_SEL BIT(4)
+
+static int cdns_dsi_j721e_init(struct cdns_dsi *dsi)
+{
+ struct platform_device *pdev = to_platform_device(dsi->base.dev);
+
+ dsi->j721e_regs = devm_platform_ioremap_resource(pdev, 1);
+ return PTR_ERR_OR_ZERO(dsi->j721e_regs);
+}
+
+static void cdns_dsi_j721e_enable(struct cdns_dsi *dsi)
+{
+ /*
+ * Enable DPI0 as its input. DSS0 DPI2 is connected
+ * to DSI DPI0. This is the only supported configuration on
+ * J721E.
+ */
+ writel(DSI_WRAP_DPI_0_EN, dsi->j721e_regs + DSI_WRAP_DPI_CONTROL);
+}
+
+static void cdns_dsi_j721e_disable(struct cdns_dsi *dsi)
+{
+ /* Put everything to defaults */
+ writel(0, dsi->j721e_regs + DSI_WRAP_DPI_CONTROL);
+}
+
+const struct dsi_platform_ops dsi_ti_j721e_ops = {
+ .init = cdns_dsi_j721e_init,
+ .enable = cdns_dsi_j721e_enable,
+ .disable = cdns_dsi_j721e_disable,
+};
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.h b/drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.h
new file mode 100644
index 000000000000..01f3dbd92db2
--- /dev/null
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI j721e Cadence DSI wrapper
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Rahul T R <r-ravikumar@xxxxxx>
+ */
+
+#ifndef CDNS_DSI_J721E_H
+#define CDNS_DSI_J721E_H
+
+#include "cdns-dsi-core.h"
+
+struct dsi_platform_ops;
You don't need the above line as you already include the cdns-dsi-core.h
+extern const struct dsi_platform_ops dsi_ti_j721e_ops;
+
+#endif /* !CDNS_DSI_J721E_H */
