Hi Conor,
> On Mon, 2022-10-24 at 20:36 +0100, Conor Dooley wrote:
>
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>
> The U-Boot dts for mpfs defines three OPPs which are missing from the
> Linux dts. For ease of synchronisation of the two, add the missing
> OPPs
> to the Linux dt too.
>
> CC: Padmarao Begari <padmarao.begari@xxxxxxxxxxxxx>
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
>
> Hey Padmarao,
> I've been trying to pick off the bits that're different between the
> Linux
> & U-Boot dts. Do you remember why we added OPPs to the U-Boot dts but
> didn't propagate them elsewhere?
>
Initially We added OPPs to the Linux dts for the CPU Frequency and
Voltage scaling while bringing up the Linux on an Emulation Platform
and the Icicle Kit for PolarFire SoC and same dts used for the U-Boot
but the U-Boot dts upstreamed first.
Regards
Padmarao
> arch/riscv/boot/dts/microchip/mpfs.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi
> b/arch/riscv/boot/dts/microchip/mpfs.dtsi
> index 0a9bb84af438..9d9ff7174341 100644
> --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
> @@ -23,6 +23,7 @@ cpu0: cpu@0 {
> reg = <0>;
> riscv,isa = "rv64imac";
> clocks = <&clkcfg CLK_CPU>;
> + operating-points-v2 = <&cluster0_opps>;
> status = "disabled";
>
> cpu0_intc: interrupt-controller {
> @@ -51,6 +52,7 @@ cpu1: cpu@1 {
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> next-level-cache = <&cctrllr>;
> + operating-points-v2 = <&cluster0_opps>;
> status = "okay";
>
> cpu1_intc: interrupt-controller {
> @@ -79,6 +81,7 @@ cpu2: cpu@2 {
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> next-level-cache = <&cctrllr>;
> + operating-points-v2 = <&cluster0_opps>;
> status = "okay";
>
> cpu2_intc: interrupt-controller {
> @@ -107,6 +110,7 @@ cpu3: cpu@3 {
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> next-level-cache = <&cctrllr>;
> + operating-points-v2 = <&cluster0_opps>;
> status = "okay";
>
> cpu3_intc: interrupt-controller {
> @@ -136,6 +140,7 @@ cpu4: cpu@4 {
> tlb-split;
> next-level-cache = <&cctrllr>;
> status = "okay";
> + operating-points-v2 = <&cluster0_opps>;
> cpu4_intc: interrupt-controller {
> #interrupt-cells = <1>;
> compatible = "riscv,cpu-intc";
> @@ -166,6 +171,24 @@ core4 {
> };
> };
> };
> +
> + cluster0_opps: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <1100000>;
> + };
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + opp-microvolt = <950000>;
> + };
> + opp-150000000 {
> + opp-hz = /bits/ 64 <150000000>;
> + opp-microvolt = <750000>;
> + };
> + };
> };
>
> refclk: mssrefclk {
> --
> 2.38.0
>
