[RFC] riscv: dts: microchip: add OPPs to mpfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

The U-Boot dts for mpfs defines three OPPs which are missing from the
Linux dts. For ease of synchronisation of the two, add the missing OPPs
to the Linux dt too.

CC: Padmarao Begari <padmarao.begari@xxxxxxxxxxxxx>
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---

Hey Padmarao,
I've been trying to pick off the bits that're different between the Linux
& U-Boot dts. Do you remember why we added OPPs to the U-Boot dts but
didn't propagate them elsewhere?

 arch/riscv/boot/dts/microchip/mpfs.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 0a9bb84af438..9d9ff7174341 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -23,6 +23,7 @@ cpu0: cpu@0 {
 			reg = <0>;
 			riscv,isa = "rv64imac";
 			clocks = <&clkcfg CLK_CPU>;
+			operating-points-v2 = <&cluster0_opps>;
 			status = "disabled";
 
 			cpu0_intc: interrupt-controller {
@@ -51,6 +52,7 @@ cpu1: cpu@1 {
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			next-level-cache = <&cctrllr>;
+			operating-points-v2 = <&cluster0_opps>;
 			status = "okay";
 
 			cpu1_intc: interrupt-controller {
@@ -79,6 +81,7 @@ cpu2: cpu@2 {
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			next-level-cache = <&cctrllr>;
+			operating-points-v2 = <&cluster0_opps>;
 			status = "okay";
 
 			cpu2_intc: interrupt-controller {
@@ -107,6 +110,7 @@ cpu3: cpu@3 {
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			next-level-cache = <&cctrllr>;
+			operating-points-v2 = <&cluster0_opps>;
 			status = "okay";
 
 			cpu3_intc: interrupt-controller {
@@ -136,6 +140,7 @@ cpu4: cpu@4 {
 			tlb-split;
 			next-level-cache = <&cctrllr>;
 			status = "okay";
+			operating-points-v2 = <&cluster0_opps>;
 			cpu4_intc: interrupt-controller {
 				#interrupt-cells = <1>;
 				compatible = "riscv,cpu-intc";
@@ -166,6 +171,24 @@ core4 {
 				};
 			};
 		};
+
+		cluster0_opps: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-600000000 {
+			    opp-hz = /bits/ 64 <600000000>;
+			    opp-microvolt = <1100000>;
+			};
+			opp-300000000 {
+			    opp-hz = /bits/ 64 <300000000>;
+			    opp-microvolt = <950000>;
+			};
+			opp-150000000 {
+			    opp-hz = /bits/ 64 <150000000>;
+			    opp-microvolt = <750000>;
+			};
+		};
 	};
 
 	refclk: mssrefclk {
-- 
2.38.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux