Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonathan,

On Sun, Oct 23, 2022 at 12:12:22PM +0100, Jonathan Cameron wrote:
> On Fri, 21 Oct 2022 17:32:21 +0200
> Marcus Folkesson <marcus.folkesson@xxxxxxxxx> wrote:
> 
> > Hi Mitja,
> > 
> > On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote:
> > > Don't hardcode the ms5611 SPI speed, limit it instead.
> > > 
> > > Signed-off-by: Mitja Spes <mitja@xxxxxxxxx>
> > > ---
> > >  drivers/iio/pressure/ms5611_spi.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
> > > index 432e912096f4..a0a7205c9c3a 100644
> > > --- a/drivers/iio/pressure/ms5611_spi.c
> > > +++ b/drivers/iio/pressure/ms5611_spi.c
> > > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
> > >  	spi_set_drvdata(spi, indio_dev);
> > >  
> > >  	spi->mode = SPI_MODE_0;
> > > -	spi->max_speed_hz = 20000000;
> > > +	spi->max_speed_hz = min(spi->max_speed_hz, 20000000U);  
> > 
> > max_speed_hz is a limit, and the max frequency the ms5611 support is
> > 20MHz.
> Hi Marcus,
> 
> I'm not following what you are commenting on.. Perhaps give more
> detail?

Sorry for being unclear.
However, I must have thought wrong, this is good as it takes the speedlimit set
in e.g. devicetree into account.


> 
> Thanks,
> 
> Jonathan
> 
> > 
> > Best regards,
> > Marcus Folkesson
> 

Best regards,
Marcus Folkesson

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux