On Fri, 21 Oct 2022 17:32:21 +0200 Marcus Folkesson <marcus.folkesson@xxxxxxxxx> wrote: > Hi Mitja, > > On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote: > > Don't hardcode the ms5611 SPI speed, limit it instead. > > > > Signed-off-by: Mitja Spes <mitja@xxxxxxxxx> > > --- > > drivers/iio/pressure/ms5611_spi.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c > > index 432e912096f4..a0a7205c9c3a 100644 > > --- a/drivers/iio/pressure/ms5611_spi.c > > +++ b/drivers/iio/pressure/ms5611_spi.c > > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi) > > spi_set_drvdata(spi, indio_dev); > > > > spi->mode = SPI_MODE_0; > > - spi->max_speed_hz = 20000000; > > + spi->max_speed_hz = min(spi->max_speed_hz, 20000000U); > > max_speed_hz is a limit, and the max frequency the ms5611 support is > 20MHz. Hi Marcus, I'm not following what you are commenting on.. Perhaps give more detail? Thanks, Jonathan > > Best regards, > Marcus Folkesson
