[PATCH v4 0/14] Add i.MX PCIe EP mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



i.MX PCIe controller is one dual mode PCIe controller, and can work either
as RC or EP.

This series add the i.MX PCIe EP mode support. And had been verified on
i.MX8MQ, i.MX8MM EVK and i.MX8MP EVK boards.

In the verification, one EVK board used as RC, the other one used as EP.
Use the cross TX/RX differential cable connect the two PCIe ports of these
two EVK boards.

+-----------+                +------------+
|   PCIe TX |<-------------->|PCIe RX     |
|           |                |            |
|EVK Board  |                |EVK Board   |
|           |                |            |
|   PCIe RX |<-------------->|PCIe TX     |
+-----------+                +------------+

NOTE:
Re-base to 6.1-rc1, and re-send the v4 series.
BTW, the following PHY changes [1] is required when apply this series.

[1] https://patchwork.kernel.org/project/linux-pci/cover/1665625622-20551-1-git-send-email-hongxing.zhu@xxxxxxx/

Main changes from v3 -> v4:
- Add the Rob's ACK in the dt-binding patch.
- Use "i.MX" to keep spell consistent.
- Squash generic endpoint infrastructure changes of
  "[12/14] PCI: imx6: Add iMX8MM PCIe EP mode" into Kconfig changes.

Main changes from v2 -> v3:
- Add the i.MX8MP PCIe EP support, and verified on i.MX8MP EVK board.
- Rebase to latest pci/next branch(tag: v6.0-rc1 plus some PCIe changes).

Main changes from v1 -> v2:
- Add Rob's ACK into first two commits.
- Rebase to the tag: pci-v5.20-changes of the pci/next branch.

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml |   3 ++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi             |  14 ++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi                 |  20 +++++++++
arch/arm64/boot/dts/freescale/imx8mp-evk.dts              |  13 ++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi                 |  19 ++++++++
arch/arm64/boot/dts/freescale/imx8mq-evk.dts              |  12 ++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi                 |  27 ++++++++++++
drivers/misc/pci_endpoint_test.c                          |   2 +
drivers/pci/controller/dwc/Kconfig                        |  23 +++++++++-
drivers/pci/controller/dwc/pci-imx6.c                     | 200 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
10 files changed, 314 insertions(+), 19 deletions(-)

[RESEND v4 01/14] dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode
[RESEND v4 02/14] dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode
[RESEND v4 03/14] dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode
[RESEND v4 04/14] arm64: dts: Add i.MX8MM PCIe EP support
[RESEND v4 05/14] arm64: dts: Add i.MX8MM PCIe EP support on EVK
[RESEND v4 06/14] arm64: dts: Add i.MX8MQ PCIe EP support
[RESEND v4 07/14] arm64: dts: Add i.MX8MQ PCIe EP support on EVK
[RESEND v4 08/14] arm64: dts: Add i.MX8MP PCIe EP support
[RESEND v4 09/14] arm64: dts: Add i.MX8MP PCIe EP support on EVK
[RESEND v4 10/14] misc: pci_endpoint_test: Add i.MX8 PCIe EP device
[RESEND v4 11/14] PCI: imx6: Add i.MX PCIe EP mode support
[RESEND v4 12/14] PCI: imx6: Add i.MX8MQ PCIe EP support
[RESEND v4 13/14] PCI: imx6: Add i.MX8MM PCIe EP support
[RESEND v4 14/14] PCI: imx6: Add i.MX8MP PCIe EP support



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux