Add i.MX8MQ PCIe EP support. Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 27 +++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 19eaa523564d..93871804b282 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1581,6 +1581,33 @@ pcie1: pcie@33c00000 { status = "disabled"; }; + pcie1_ep: pcie_ep@33c00000 { + compatible = "fsl,imx8mq-pcie-ep"; + reg = <0x33c00000 0x000400000>, + <0x20000000 0x08000000>; + reg-names = "regs", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ -- 2.25.1