RE: [PATCH v4 0/14] Add i.MX PCIe EP mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping.
Almost one month pass away after this re-send of v4 series. 
Any comments?

Thanks.
Best Regards
Richard Zhu

> -----Original Message-----
> From: Richard Zhu <hongxing.zhu@xxxxxxx>
> Sent: 2022年10月24日 16:06
> To: l.stach@xxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> lorenzo.pieralisi@xxxxxxx; shawnguo@xxxxxxxxxx; kishon@xxxxxx;
> kw@xxxxxxxxx; Frank Li <frank.li@xxxxxxx>
> Cc: Hongxing Zhu <hongxing.zhu@xxxxxxx>; linux-pci@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; dl-linux-imx
> <linux-imx@xxxxxxx>
> Subject: [PATCH v4 0/14] Add i.MX PCIe EP mode support
> 
> i.MX PCIe controller is one dual mode PCIe controller, and can work either as
> RC or EP.
> 
> This series add the i.MX PCIe EP mode support. And had been verified on
> i.MX8MQ, i.MX8MM EVK and i.MX8MP EVK boards.
> 
> In the verification, one EVK board used as RC, the other one used as EP.
> Use the cross TX/RX differential cable connect the two PCIe ports of these two
> EVK boards.
> 
> +-----------+                +------------+
> |   PCIe TX |<-------------->|PCIe RX     |
> |           |                |            |
> |EVK Board  |                |EVK Board   |
> |           |                |            |
> |   PCIe RX |<-------------->|PCIe TX     |
> +-----------+                +------------+
> 
> NOTE:
> Re-base to 6.1-rc1, and re-send the v4 series.
> BTW, the following PHY changes [1] is required when apply this series.
> 
> [1]
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchw
> ork.kernel.org%2Fproject%2Flinux-pci%2Fcover%2F1665625622-20551-1-git-s
> end-email-hongxing.zhu%40nxp.com%2F&amp;data=05%7C01%7Chongxing.z
> hu%40nxp.com%7C80b50b3789f9433f62e008dab5998a09%7C686ea1d3bc2b
> 4c6fa92cd99c5c301635%7C0%7C0%7C638021968298265067%7CUnknown%
> 7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwi
> LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=j70ORNKBvTCjWtJzS375
> TvuQfCGrVRQNbxS%2BhrGI0ZA%3D&amp;reserved=0
> 
> Main changes from v3 -> v4:
> - Add the Rob's ACK in the dt-binding patch.
> - Use "i.MX" to keep spell consistent.
> - Squash generic endpoint infrastructure changes of
>   "[12/14] PCI: imx6: Add iMX8MM PCIe EP mode" into Kconfig changes.
> 
> Main changes from v2 -> v3:
> - Add the i.MX8MP PCIe EP support, and verified on i.MX8MP EVK board.
> - Rebase to latest pci/next branch(tag: v6.0-rc1 plus some PCIe changes).
> 
> Main changes from v1 -> v2:
> - Add Rob's ACK into first two commits.
> - Rebase to the tag: pci-v5.20-changes of the pci/next branch.
> 
> Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml |   3 ++
> arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi             |  14 ++++++
> arch/arm64/boot/dts/freescale/imx8mm.dtsi                 |  20
> +++++++++
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts              |  13 ++++++
> arch/arm64/boot/dts/freescale/imx8mp.dtsi                 |  19
> ++++++++
> arch/arm64/boot/dts/freescale/imx8mq-evk.dts              |  12 ++++++
> arch/arm64/boot/dts/freescale/imx8mq.dtsi                 |  27
> ++++++++++++
> drivers/misc/pci_endpoint_test.c                          |   2 +
> drivers/pci/controller/dwc/Kconfig                        |  23
> +++++++++-
> drivers/pci/controller/dwc/pci-imx6.c                     | 200
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++--------
> 10 files changed, 314 insertions(+), 19 deletions(-)
> 
> [RESEND v4 01/14] dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode
> [RESEND v4 02/14] dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode
> [RESEND v4 03/14] dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode
> [RESEND v4 04/14] arm64: dts: Add i.MX8MM PCIe EP support [RESEND v4
> 05/14] arm64: dts: Add i.MX8MM PCIe EP support on EVK [RESEND v4 06/14]
> arm64: dts: Add i.MX8MQ PCIe EP support [RESEND v4 07/14] arm64: dts:
> Add i.MX8MQ PCIe EP support on EVK [RESEND v4 08/14] arm64: dts: Add
> i.MX8MP PCIe EP support [RESEND v4 09/14] arm64: dts: Add i.MX8MP PCIe
> EP support on EVK [RESEND v4 10/14] misc: pci_endpoint_test: Add i.MX8
> PCIe EP device [RESEND v4 11/14] PCI: imx6: Add i.MX PCIe EP mode support
> [RESEND v4 12/14] PCI: imx6: Add i.MX8MQ PCIe EP support [RESEND v4
> 13/14] PCI: imx6: Add i.MX8MM PCIe EP support [RESEND v4 14/14] PCI: imx6:
> Add i.MX8MP PCIe EP support




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux