Re: [PATCH] arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 18/10/2022 23:16, Martin Blumenstingl wrote:
Hello Anand,

On Tue, Oct 18, 2022 at 9:53 PM Anand Moon <linux.amoon@xxxxxxxxx> wrote:

Odroid N2/N2+ support active cooling via gpio-fan controller.
Add fan controls and tip point for cpu and ddr thermal sensor
on this boards.
In the schematics for board rev 0.6 [0] I cannot find any information
about a fan connector.
The schematics for board rev 0.3 [1] on the other hand document a PWM
based fan connector on page 16.

It seems the fan connector is on page 41 on rev 0.6 and it seems to be the same.

So now I am not sure whether your patch only applies to certain board
revisions, the schematics are incorrect, etc.

Can you please provide some details about the fan connector on
Odroid-N2/N2+ and which hardware revisions are supported (and which
aren't) by your patch?


Thank you!
Martin


[0] https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
[1] https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.3_20190117.pdf

Neil



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux