[PATCH v2 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The GPIO55 is part of SPI10 pins, not its chip-select.  Probably the
intention was to use one of dedicated chip-select GPIOs: 47 or 67.
GPIO47 is used for UART2, so choose GPIO67.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v1:
1. None

Not tested on hardware.
---
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index ded5b7ceeaf9..7a582a5fe3a8 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -897,7 +897,7 @@ default {
 				};
 				cs {
 					function = "gpio";
-					pins = "gpio55";
+					pins = "gpio67";
 					drive-strength = <2>;
 					bias-disable;
 				};
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux