On 9/1/22 1:25 PM, Mathieu Poirier wrote:
On Thu, Jul 07, 2022 at 06:39:55PM -0700, Tanmay Shah wrote:
[ ... ]
--- /dev/null
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: GPL-2.0
Hi Mathieu,
I tried to fix SPDX-License-Identifier to GPL (same as MODULE_LICENSE
below), However checkpatch.pl reports this as following warning:
"WARNING: 'SPDX-License-Identifier: GPL' is not supported in LICENSES/..."
I see that GPL-1.0 is under LICENSE/deprecated directory.
+/*
+ * ZynqMP R5 Remote Processor driver
+ *
+ */
+
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
[ ... ]
+MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
+
+static struct platform_driver zynqmp_r5_remoteproc_driver = {
+ .probe = zynqmp_r5_remoteproc_probe,
+ .driver = {
+ .name = "zynqmp_r5_remoteproc",
+ .of_match_table = zynqmp_r5_remoteproc_match,
+ },
+};
+module_platform_driver(zynqmp_r5_remoteproc_driver);
+
+MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL");
There is a discrepency between the GPL-2.0 in the SPDS identifier and the above.
Also, changing to MODULE_LICENSE("GPL v2") gives following warning:
WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module:
Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
#1115: FILE: drivers/remoteproc/xlnx_r5_remoteproc.c:1034:
+MODULE_LICENSE("GPL v2");
So, It looks like SPDX-License-Identifier should be GPL-2.0-only and
MODULE_LICENSE should be change to "GPL".
It this ok? Any other suggestions ?
Thanks,
Tanmay
More comments tomorrow or Tuesday.
Thanks,
Mathieu
--
2.25.1
