I have a question for you and Wolfram, we don’t use device trees and are not planning to use device trees; we only use ACPI tables. But I think when Khalil submitted the first version of the i2c-mlxbf.c driver, it was requested from him to add devicetree support. Do you know why? Is it possible to remove the device tree support and so this doc? or is devicetree support a requirement regardless of the actual implementation? -----Original Message----- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Sent: Wednesday, September 21, 2022 2:55 AM To: Asmaa Mnebhi <asmaa@xxxxxxxxxx> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; robh@xxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-i2c@xxxxxxxxxxxxxxx; Khalil Blaiech <kblaiech@xxxxxxxxxx> Subject: Re: [PATCH v5 8/8] i2c: i2c-mlxbf.c: Update binding devicetree On Tue, 20 Sep 2022 13:47:36 -0400, Asmaa Mnebhi wrote: > In the latest version of the i2c-mlxbf.c driver, the "Smbus block" > resource was broken down to 3 separate resources "Smbus timer", "Smbus > master" and "Smbus slave" to accommodate for BlueField-3 SoC > registers' changes. > > Reviewed-by: Khalil Blaiech <kblaiech@xxxxxxxxxx> > Signed-off-by: Asmaa Mnebhi <asmaa@xxxxxxxxxx> > --- > .../bindings/i2c/mellanox,i2c-mlxbf.yaml | 48 ++++++++++++++----- > 1 file changed, 36 insertions(+), 12 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.example.dts:26.19-20 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:384: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1420: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.