This series introduces the Qualcom sa8540p-ride automotive development
board, also called as Qdrive-3 board.
Changes in v4:
- Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board.
- Removed usb_1 related nodes, as usb1 doesn't have any port connected on
Qdrive3 board.
- Added Reported-by tag for Shazad(for ufs and usb_1 node removals)
Parikshit Pareek (3):
dt-bindings: arm: qcom: Document additional sa8540p device
arm64: dts: qcom: sa8295p: move common nodes to dtsi
arm64: dts: qcom: introduce sa8540p-ride dts
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 392 +-----------------
arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts | 15 +
.../{sa8295p-adp.dts => sa8540p-adp.dtsi} | 0
5 files changed, 31 insertions(+), 378 deletions(-)
rewrite arch/arm64/boot/dts/qcom/sa8295p-adp.dts (96%)
create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
copy arch/arm64/boot/dts/qcom/{sa8295p-adp.dts => sa8540p-adp.dtsi} (100%)
--
2.17.1
