There are many ADP boards with lot of common features. Move common nodes to sa8540p-adp.dtsi file. This will be base for many ADP boards to be introduced in near future. Signed-off-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 392 +----------------- .../{sa8295p-adp.dts => sa8540p-adp.dtsi} | 0 2 files changed, 14 insertions(+), 378 deletions(-) rewrite arch/arm64/boot/dts/qcom/sa8295p-adp.dts (96%) copy arch/arm64/boot/dts/qcom/{sa8295p-adp.dts => sa8540p-adp.dtsi} (100%) diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts dissimilarity index 96% index ca5f5ad32ce5..c6d5b7644c20 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -1,378 +1,14 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, The Linux Foundation. All rights reserved. - * Copyright (c) 2022, Linaro Limited - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include <dt-bindings/spmi/spmi.h> - -#include "sa8540p.dtsi" - -/ { - model = "Qualcomm SA8295P ADP"; - compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; - - aliases { - serial0 = &qup2_uart17; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - pmm8540-a-regulators { - compatible = "qcom,pm8150-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_l3a: ldo3 { - regulator-name = "vreg_l3a"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1208000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l13a: ldo13 { - regulator-name = "vreg_l13a"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pmm8540-c-regulators { - compatible = "qcom,pm8150-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3c: ldo3 { - regulator-name = "vreg_l3c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1208000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l10c: ldo10 { - regulator-name = "vreg_l10c"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l17c: ldo17 { - regulator-name = "vreg_l17c"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - }; - - pmm8540-g-regulators { - compatible = "qcom,pm8150-rpmh-regulators"; - qcom,pmic-id = "g"; - - vreg_l3g: ldo3 { - regulator-name = "vreg_l3g"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7g: ldo7 { - regulator-name = "vreg_l7g"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8g: ldo8 { - regulator-name = "vreg_l8g"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; -}; - -&qup2 { - status = "okay"; -}; - -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/sa8540p/adsp.mbn"; - status = "okay"; -}; - -&remoteproc_nsp0 { - firmware-name = "qcom/sa8540p/cdsp.mbn"; - status = "okay"; -}; - -&remoteproc_nsp1 { - firmware-name = "qcom/sa8540p/cdsp1.mbn"; - status = "okay"; -}; - -&spmi_bus { - pm8450a: pmic@0 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450c: pmic@4 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x4 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450e: pmic@8 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x8 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450g: pmic@c { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l17c>; - vcc-max-microamp = <800000>; - vccq-supply = <&vreg_l6c>; - vccq-max-microamp = <900000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l8g>; - vdda-pll-supply = <&vreg_l3g>; - - status = "okay"; -}; - -&ufs_card_hc { - reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l10c>; - vcc-max-microamp = <800000>; - vccq-supply = <&vreg_l3c>; - vccq-max-microamp = <900000>; - - status = "okay"; -}; - -&ufs_card_phy { - vdda-phy-supply = <&vreg_l8g>; - vdda-pll-supply = <&vreg_l3g>; - - status = "okay"; -}; - -&usb_0 { - status = "okay"; -}; - -&usb_0_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "peripheral"; -}; - -&usb_0_hsphy { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7a>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_0_qmpphy { - vdda-phy-supply = <&vreg_l3a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "host"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l1c>; - vdda18-supply = <&vreg_l7c>; - vdda33-supply = <&vreg_l2c>; - - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vreg_l4c>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&usb_2_hsphy0 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_hsphy1 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_hsphy2 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_hsphy3 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_qmpphy0 { - vdda-phy-supply = <&vreg_l3a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&usb_2_qmpphy1 { - vdda-phy-supply = <&vreg_l3a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <38400000>; -}; - -/* PINCTRL */ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include "sa8540p-adp.dtsi" + +/ { + model = "Qualcomm SA8295P ADP"; + compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8540p-adp.dtsi similarity index 100% copy from arch/arm64/boot/dts/qcom/sa8295p-adp.dts copy to arch/arm64/boot/dts/qcom/sa8540p-adp.dtsi -- 2.17.1