These SoCs are really completely dma coherent in their entirety so add
the dma-coherent property at the soc level in the device tree and drop
the instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 27033c558e3e..e406499a26b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -273,6 +273,7 @@ soc: soc {
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ dma-coherent;
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
@@ -355,7 +356,6 @@ crypto: crypto@1700000 {
ranges = <0x0 0x00 0x1700000 0x100000>;
reg = <0x00 0x1700000 0x0 0x100000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.4-job-ring",
@@ -794,7 +794,6 @@ pcie1: pcie@3400000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -834,7 +833,6 @@ pcie2: pcie@3500000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -874,7 +872,6 @@ pcie3: pcie@3600000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
--
2.37.1
