Re: [PATCH v2 5/9] arm64: dts: ls1046a: make dma-coherent global to the SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

On 9/15/22 7:34 PM, Li Yang wrote:
> These SoCs are really completely dma coherent in their entirety so add
> the dma-coherent property at the soc level in the device tree and drop
> the instances where it's specifically added to a few select devices.
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index 27033c558e3e..e406499a26b4 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -273,6 +273,7 @@ soc: soc {
>  		#size-cells = <2>;
>  		ranges;
>  		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
> +		dma-coherent;
>  
>  		ddr: memory-controller@1080000 {
>  			compatible = "fsl,qoriq-memory-controller";
> @@ -355,7 +356,6 @@ crypto: crypto@1700000 {
>  			ranges = <0x0 0x00 0x1700000 0x100000>;
>  			reg = <0x00 0x1700000 0x0 0x100000>;
>  			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> -			dma-coherent;
>  
>  			sec_jr0: jr@10000 {
>  				compatible = "fsl,sec-v5.4-job-ring",
> @@ -794,7 +794,6 @@ pcie1: pcie@3400000 {
>  			#address-cells = <3>;
>  			#size-cells = <2>;
>  			device_type = "pci";
> -			dma-coherent;
>  			num-viewport = <8>;
>  			bus-range = <0x0 0xff>;
>  			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
> @@ -834,7 +833,6 @@ pcie2: pcie@3500000 {
>  			#address-cells = <3>;
>  			#size-cells = <2>;
>  			device_type = "pci";
> -			dma-coherent;
>  			num-viewport = <8>;
>  			bus-range = <0x0 0xff>;
>  			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
> @@ -874,7 +872,6 @@ pcie3: pcie@3600000 {
>  			#address-cells = <3>;
>  			#size-cells = <2>;
>  			device_type = "pci";
> -			dma-coherent;
>  			num-viewport = <8>;
>  			bus-range = <0x0 0xff>;
>  			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
> 

I'd like to summarize the conclusions of [1] below. This patch breaks
I2C0, which is the only user of eDMA at the moment. eDMA is noncoherent
because snooping is not enabled for it. I have submitted a patch [2] to
U-Boot to enable snooping for eDMA. For now, this patch must add
dma-noncoherent to the i2c0 node.

--Sean

[1] https://lore.kernel.org/linux-arm-kernel/29a09f45-24f9-68be-bdc2-8691af41b5db@xxxxxxxx/T/#t
[2] https://lore.kernel.org/u-boot/20220923160551.2200873-1-sean.anderson@xxxxxxxx/T/#u



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux