From: Pankaj Bansal <pankaj.bansal@xxxxxxx> The qspi flash in ls1046a QDS board can operate at 50MHz frequency. Therefore, update the maximum supported freq in dts file. Signed-off-by: Pankaj Bansal <pankaj.bansal@xxxxxxx> Signed-off-by: Li Yang <leoyang.li@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index f969173fb337..b2fcbba60d3a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -182,7 +182,7 @@ qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; reg = <0>; -- 2.37.1