Re: [PATCH 2/5] arm64: dts: qcom: sdm845-db845c: drop gpios from CCI I2C sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2 Aug 2022 at 17:40, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> The OV7251 and OV8856 camera sensor bindings do not allow
> property "gpios" and Linux driver does not parse it.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
>
> Not tested on hardware.
> ---
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
>  1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index b9304f81290a..f313f6964810 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1214,8 +1214,6 @@ camera@10 {
>                 reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&cam0_default>;
> -               gpios = <&tlmm 13 0>,
> -                       <&tlmm 9 GPIO_ACTIVE_LOW>;
>
>                 clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
>                 clock-names = "xvclk";
> @@ -1256,8 +1254,6 @@ camera@60 {
>                 enable-gpios = <&tlmm 21 0>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&cam3_default>;
> -               gpios = <&tlmm 16 0>,
> -                       <&tlmm 21 0>;
>
>                 clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
>                 clock-names = "xclk";
> --
> 2.34.1

Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux