[PATCH 3/5] arm64: dts: qcom: use GPIO flags for tlmm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs.  Include
gpio.h header if this is first usage of that flag.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts               | 2 +-
 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/msm8994.dtsi                      | 3 ++-
 arch/arm64/boot/dts/qcom/msm8996.dtsi                      | 3 ++-
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts                 | 4 ++--
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts       | 2 +-
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts         | 4 ++--
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts       | 2 +-
 arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts           | 2 +-
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts                    | 2 +-
 10 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index 567b33106556..92f264891d84 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -368,7 +368,7 @@ &sdhc2 {
 
 	bus-width = <4>;
 
-	cd-gpios = <&tlmm 38 0x1>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vreg_l13a_2p95>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index f430d797196f..ff60b7004d26 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -471,7 +471,7 @@ &sdhc1 {
 &sdhc2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 100 0>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&pm8994_l21>;
 	vqmmc-supply = <&pm8994_l13>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 8bc6c070e306..86ef0091caff 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8994.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -502,7 +503,7 @@ sdhc2: mmc@f98a4900 {
 			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
 			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
 
-			cd-gpios = <&tlmm 100 0>;
+			cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
 			bus-width = <4>;
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 742eac4ce9b3..0815b31c9e10 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8996.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -3337,7 +3338,7 @@ wcd9335: codec@1{
 					interrupt-names = "intr1", "intr2";
 					interrupt-controller;
 					#interrupt-cells = <1>;
-					reset-gpios = <&tlmm 64 0>;
+					reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 
 					slim-ifc-dev = <&tasha_ifd>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index f313f6964810..dff49e3dfe56 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1081,7 +1081,7 @@ &wcd9340{
 	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-	reset-gpios = <&tlmm 64 0>;
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-tx-supply = <&vreg_s4a_1p8>;
@@ -1251,7 +1251,7 @@ camera@60 {
 		reg = <0x60>;
 
 		// CAM3_RST_N
-		enable-gpios = <&tlmm 21 0>;
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam3_default>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 82c27f90d300..0f470cf1ed1c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -546,7 +546,7 @@ &wcd9340{
 	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-	reset-gpios = <&tlmm 64 0>;
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-tx-supply = <&vreg_s4a_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 7747081b9887..6a2b98c23628 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -126,7 +126,7 @@ vreg_tp_vddio: vreg-tp-vddio {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 
-		gpio = <&tlmm 23 0>;
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
 		regulator-always-on;
 		regulator-boot-on;
 		enable-active-high;
@@ -712,7 +712,7 @@ &wcd9340 {
 	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-	reset-gpios = <&tlmm 64 0>;
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-tx-supply = <&vreg_s4a_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index a7af1bed4312..be59a8ba9c1f 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -772,7 +772,7 @@ &wcd9340{
 	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-	reset-gpios = <&tlmm 64 0>;
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-tx-supply = <&vreg_s4a_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index b0315eeb1320..f954fe5cb61a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -704,7 +704,7 @@ &wcd9340{
 	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-	reset-gpios = <&tlmm 64 0>;
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-tx-supply = <&vreg_s4a_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 7ab3627cc347..a102aa5efa32 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -635,7 +635,7 @@ &soc {
 	wcd938x: codec {
 		compatible = "qcom,wcd9380-codec";
 		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 0>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
 		vdd-buck-supply = <&vreg_s4a_1p8>;
 		vdd-rxtx-supply = <&vreg_s4a_1p8>;
 		vdd-io-supply = <&vreg_s4a_1p8>;
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux