[PATCH] arm64: dts: qcom: sm8250: move DSI opp table to the dsi0 node

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

It makes no sense to have the OPP table for the DSI controllers in the
DSI1 PHY node. Move it to more logical dsi0 device node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++--------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index bc773e210023..5843e46a3164 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3571,6 +3571,25 @@ dsi0_out: endpoint {
 						};
 					};
 				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
 			};
 
 			dsi0_phy: dsi-phy@ae94400 {
@@ -3663,25 +3682,6 @@ dsi1_phy: dsi-phy@ae96400 {
 				clock-names = "iface", "ref";
 
 				status = "disabled";
-
-				dsi_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					opp-187500000 {
-						opp-hz = /bits/ 64 <187500000>;
-						required-opps = <&rpmhpd_opp_low_svs>;
-					};
-
-					opp-300000000 {
-						opp-hz = /bits/ 64 <300000000>;
-						required-opps = <&rpmhpd_opp_svs>;
-					};
-
-					opp-358000000 {
-						opp-hz = /bits/ 64 <358000000>;
-						required-opps = <&rpmhpd_opp_svs_l1>;
-					};
-				};
 			};
 		};
 
-- 
2.35.1