On 22.08.2022 21:11, Dmitry Baryshkov wrote:
> It makes no sense to have the OPP table for the DSI controllers in the
> DSI1 PHY node. Move it to more logical dsi0 device node.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++--------------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index bc773e210023..5843e46a3164 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3571,6 +3571,25 @@ dsi0_out: endpoint {
> };
> };
> };
> +
> + dsi_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> };
>
> dsi0_phy: dsi-phy@ae94400 {
> @@ -3663,25 +3682,6 @@ dsi1_phy: dsi-phy@ae96400 {
> clock-names = "iface", "ref";
>
> status = "disabled";
> -
> - dsi_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - opp-187500000 {
> - opp-hz = /bits/ 64 <187500000>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> - };
> -
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - required-opps = <&rpmhpd_opp_svs>;
> - };
> -
> - opp-358000000 {
> - opp-hz = /bits/ 64 <358000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> - };
> - };
> };
> };
>
