Hi, On Thu, 11 Aug 2022 13:31:11 +0300, Vyacheslav Bocharov wrote: > - add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home > automation controller with the following features: > - DIN Rail Mounting > - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 1/2/4GB LPDDR4 > - 8/16/32GB eMMC flash > - 1 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac > - TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power > and Zigbee 3.0 support. > - 2 x gpio LEDS > - GPIO user Button > - 1 x 1-Wire > - 2 x RS-485 > - 4 x dry contact digital GPIO inputs > - 3 x relay GPIO outputs > - DC source with a voltage of 9 to 56 V / Active POE > > [...] Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.1/dt64) [1/2] arm64: dts: meson-axg: add support for JetHub D1p (j110) https://git.kernel.org/amlogic/c/59ec069d50550273a83180ea6c950d382d7bf8e3 [2/2] dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110) https://git.kernel.org/amlogic/c/a80c60359a42cf146872b9442cf847e7c2452a23 These changes has been applied on the intermediate git tree [1]. The v6.1/dt64 branch will then be sent via a formal Pull Request to the Linux SoC maintainers for inclusion in their intermediate git branches in order to be sent to Linus during the next merge window, or sooner if it's a set of fixes. In the cases of fixes, those will be merged in the current release candidate kernel and as soon they appear on the Linux master branch they will be backported to the previous Stable and Long-Stable kernels [2]. The intermediate git branches are merged daily in the linux-next tree [3], people are encouraged testing these pre-release kernels and report issues on the relevant mailing-lists. If problems are discovered on those changes, please submit a signed-off-by revert patch followed by a corrective changeset. [1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git [3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git -- Neil
