The system controller (SCU) is the central unit to manage the resources on i.MX8 platforms. The SCU firmware provides a set of APIs to access the GPIO PINs on the SCU domain. This patch series implements the standard GPIO driver over the SCU firmware APIs, so that the GPIOs on the SCU domain could be accessed like a local GPIO PINs. Changes in V4: - remove the generic compatible of "fsl,imx-sc-gpio" - update the gpio $ref in "fsl,scu.yaml" as the file name is changed - update the commit comment for 0003 because the driver is moved to the directory of "drivers/gpio" Changes in V3: - follow the other imx8 SCU binding rule and rename the compatible string from fsl,imx8-scu-gpio to fsl,imx8qxp-sc-gpio - rename the doc file from fsl,imx8-scu-gpio.yaml to fsl,imx-sc-gpio.yaml Changes in V2: - move the driver into the gpio directory per Krzysztof's feedback - change the subnode description in file fsl,scu.yaml - fix the dt_binding_check error Shenwei Wang (3): dt-bindings: gpio: Add imx scu gpio driver bindings dt-bindings: firmware: imx: Add imx-scu gpio node gpio: imx-scu: add imx-scu GPIO driver .../devicetree/bindings/firmware/fsl,scu.yaml | 5 + .../bindings/gpio/fsl,imx-sc-gpio.yaml | 39 +++++ drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-imx-scu.c | 139 ++++++++++++++++++ 5 files changed, 188 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/fsl,imx-sc-gpio.yaml create mode 100644 drivers/gpio/gpio-imx-scu.c -- 2.25.1
