- add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home automation controller with the following features: - DIN Rail Mounting - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1/2/4GB LPDDR4 - 8/16/32GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac - TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Active POE - unify device tree files for JetHub D1/D1p devices Vyacheslav Bocharov (2): arm64: dts: meson-axg: add support for JetHub D1p (j110) dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110) .../devicetree/bindings/arm/amlogic.yaml | 1 + arch/arm64/boot/dts/amlogic/Makefile | 2 + .../amlogic/meson-axg-jethome-jethub-j100.dts | 338 +---------------- .../meson-axg-jethome-jethub-j110-rev-2.dts | 37 ++ .../meson-axg-jethome-jethub-j110-rev-3.dts | 27 ++ .../meson-axg-jethome-jethub-j1xx.dtsi | 351 ++++++++++++++++++ 6 files changed, 422 insertions(+), 334 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi -- 2.30.2
