This series clean up the sc8280xp CRD and X13s HID nodes somewhat and marks the keyboard and touchpad as wakeup sources. Included is also support for the alternate (second-source) touchpad found on some X13s laptops. Note that the node is disabled for now as ideally the boot firmware should be determining which touchpad is actually populated. With some additional fixes it is possible to have both nodes enabled and letting Linux do the probing, but let's wait for a conclusion to the discussion about whether that is desirable before enabling them both: https://lore.kernel.org/all/YuJXMHoT4ijUxnRb@xxxxxxxxxxxxxxxxxxxx Johan Johan Hovold (7): arm64: dts: qcom: sc8280xp-crd: disable touchscreen pull-up arm64: dts: qcom: sc8280xp-crd: move HID pin config arm64: dts: qcom: sc8280xp-crd: mark HID wakeup sources arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: disable touchscreen pull-up arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: move HID pin config arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: mark HID wakeup sources arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add alternate touchpad arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 22 +++++++++-- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 38 +++++++++++++++++-- 2 files changed, 54 insertions(+), 6 deletions(-) -- 2.35.1
