On 5.08.2022 11:23, Johan Hovold wrote: > This series clean up the sc8280xp CRD and X13s HID nodes somewhat and > marks the keyboard and touchpad as wakeup sources. > > Included is also support for the alternate (second-source) touchpad > found on some X13s laptops. Note that the node is disabled for now as > ideally the boot firmware should be determining which touchpad is > actually populated. Interesting, what bootloader is used on these? Are you chainloading something on top of Qualcomm's XBL UEFI? Konrad > > With some additional fixes it is possible to have both nodes enabled and > letting Linux do the probing, but let's wait for a conclusion to the > discussion about whether that is desirable before enabling them both: > > https://lore.kernel.org/all/YuJXMHoT4ijUxnRb@xxxxxxxxxxxxxxxxxxxx > > Johan > > > Johan Hovold (7): > arm64: dts: qcom: sc8280xp-crd: disable touchscreen pull-up > arm64: dts: qcom: sc8280xp-crd: move HID pin config > arm64: dts: qcom: sc8280xp-crd: mark HID wakeup sources > arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: disable touchscreen > pull-up > arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: move HID pin config > arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: mark HID wakeup > sources > arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add alternate > touchpad > > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 22 +++++++++-- > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 38 +++++++++++++++++-- > 2 files changed, 54 insertions(+), 6 deletions(-) >
