The HID pin configurations belong in the HID nodes rather than i2c bus
node.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
.../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 85efce641a4e..76ba2d5fa17e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -177,7 +177,7 @@ &qup0_i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
- pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>;
+ pinctrl-0 = <&qup0_i2c4_default>;
status = "okay";
@@ -185,9 +185,13 @@ &qup0_i2c4 {
touchscreen@10 {
compatible = "hid-over-i2c";
reg = <0x10>;
+
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
};
};
@@ -203,24 +207,32 @@ &qup2_i2c5 {
clock-frequency = <400000>;
pinctrl-names = "default";
- pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>;
+ pinctrl-0 = <&qup2_i2c5_default>;
status = "okay";
touchpad@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
+
hid-descr-addr = <0x20>;
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpad_default>;
};
keyboard@68 {
compatible = "hid-over-i2c";
reg = <0x68>;
+
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&kybd_default>;
};
};
--
2.35.1
