This is version 3 of the series that adds support for the ltc2952 powerpath chip. This series adds a driver for the LTC2952, an external power control chip, which signals the OS to shut down. Additionally this driver lets the kernel power down the board. This driver was tested with: - kernel version 3.15.8, 3.17-rc7 - ARM based processor (TI AM335x series) v2..v3: - Allow absence of button input pin (and document that) - Fix some whitespace issues - Straighten out control flow here and there - Get rid of gpio array. This was only used in setup/cleanup cases. It never mattered elsewhere - Add some explanation to the commit message that introduces the driver - Add other contributors - Update René's e-mail; his Xsens e-mail is no longer valid - Now also tested on v3.17-rc7 René Moll (2): power: reset: add LTC2952 poweroff support power: reset: document LTC2952 poweroff support .../bindings/power/reset/ltc2952-poweroff.txt | 31 ++ drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ltc2952-poweroff.c | 381 +++++++++++++++++++++ 4 files changed, 423 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt create mode 100644 drivers/power/reset/ltc2952-poweroff.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html