Re: [PATCH v5 2/2] dt-bindings: fpga: add binding doc for ecp5-spi fpga mgr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 29, 2022 at 11:01:24AM +0200, Daniel Glöckner wrote:
> Hi,
> 
> On Tue, Jul 19, 2022 at 02:23:35PM +0300, Ivan Bornyakov wrote:
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - lattice,ecp5-fpga-mgr
> 
> Since this driver uses the same interface as the existing
> drivers/fpga/machxo2-spi.c driver, wouldn't it be advisable to use a
> similar compatible id, i.e. lattice,ecp5-slave-spi?
> 

To quote Krzysztof Kozlowski from v1 review:
 > Do not encode interface name in compatible so no "spi"

See https://lore.kernel.org/linux-fpga/044a9736-a4ec-c250-7755-c80a5bcbe38b@xxxxxxxxxx/

> > +required:
> > +  - compatible
> > +  - reg
> > +  - program-gpios
> > +  - init-gpios
> > +  - done-gpios
> 
> I think some of the GPIOs can be made optional by reading the status
> register or using the refresh command, assuming the slave spi interface
> stayed enabled after previous programming and we are not dealing with
> several chained FPGAs. But that can of course be left as an exercise for
> other developers.

I would prefer the latter.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux