Hi Rob, On Wed, Jul 20, 2022 at 05:39:06PM -0600, Rob Herring wrote: > On Tue, Jul 19, 2022 at 11:17:32AM +0200, Jerome Neanne wrote: > > From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > > > > Add a power-button property to configure the EN/PB/VSENSE pin as a > > powerbutton. > > Belongs in the first binding patch. > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > > Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx> > > --- > > Documentation/devicetree/bindings/regulator/ti,tps65219.yaml | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml > > index 6a60e62a313c..3f7f4c0280c3 100644 > > --- a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml > > +++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml > > @@ -36,6 +36,11 @@ properties: > > include/dt-bindings/interrupt-controller/irq.h > > const: 1 > > > > + power-button: > > ti,power-button > > Though doesn't 'system-power-controller' imply this? No, there is a difference between system-power-controller and power-button. If you ask, my description is probably not clear enough. Let me try a new one: TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either EN in which case it functions as an enable pin. It can be VSENSE which compares the voltages and triggers an automatic on/off request. And it can be PB in which case it can be configured to trigger an interrupt to the SoC. ti,power-button reflects exactly the last one of those options where the board has a button wired to the pin and triggers an interrupt on pressing it. I hope that answers your question. We will fix the description in v2. Thanks, Markus > > > + type: boolean > > + description: Optional property that sets the EN/PB/VSENSE pin to be a > > + power-button. > > + > > patternProperties: > > "^buck[1-3]-supply$": > > description: Input supply phandle of one regulator. > > -- > > 2.17.1 > > > >