[PATCH 0/2] PCI: mvebu: add support for orion soc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello all!

Working in close co-operation with Pali we made an initial attempt at bringing
support for orion PCIe into mvebu PCIe driver. Currently the address of
workaround memory range is hard coded and based on compatible string only. As
Pali describes in another thread, we were not able to figure out what's the
correct way to configure a configuration space. That discussion is here:
https://lore.kernel.org/linux-pci/20220710225108.bgedria6igtqpz5l@pali/T/#u

I tested this with D-Link DNS-323 rev A1 and it's working. As usual, all
comments and feedback is welcome.

Thanks,
Mauri

Mauri Sandberg (2):
  dt-bindings: PCI: mvebu: Add orion5x compatible
  PCI: mvebu: add support for orion5x

 .../devicetree/bindings/pci/mvebu-pci.txt     |  1 +
 arch/arm/mach-orion5x/common.c                | 13 ----
 drivers/pci/controller/Kconfig                |  2 +-
 drivers/pci/controller/pci-mvebu.c            | 59 +++++++++++++++++++
 4 files changed, 61 insertions(+), 14 deletions(-)


base-commit: ff6992735ade75aae3e35d16b17da1008d753d28
--
2.25.1



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux