On Mon, Jul 18, 2022 at 11:28:40PM +0300, Mauri Sandberg wrote: > Hello all! > > Working in close co-operation with Pali we made an initial attempt at bringing > support for orion PCIe into mvebu PCIe driver. Currently the address of > workaround memory range is hard coded and based on compatible string only. As > Pali describes in another thread, we were not able to figure out what's the > correct way to configure a configuration space. That discussion is here: > https://lore.kernel.org/linux-pci/20220710225108.bgedria6igtqpz5l@pali/T/#u > > I tested this with D-Link DNS-323 rev A1 and it's working. As usual, all > comments and feedback is welcome. > > Thanks, > Mauri > > Mauri Sandberg (2): > dt-bindings: PCI: mvebu: Add orion5x compatible > PCI: mvebu: add support for orion5x > > .../devicetree/bindings/pci/mvebu-pci.txt | 1 + > arch/arm/mach-orion5x/common.c | 13 ---- > drivers/pci/controller/Kconfig | 2 +- > drivers/pci/controller/pci-mvebu.c | 59 +++++++++++++++++++ > 4 files changed, 61 insertions(+), 14 deletions(-) Hi Mauri, Can you address anything in 2/2 (if necessary), incorporate any acks, and post a v2? There was some confusion around the first patch (there are two in the thread, likely the same?), and I didn't read the 2/2 feedback in detail to see if any changes were needed. Bjorn
