Hi Yassine On Mon, Jul 11, 2022 at 06:40:39PM +0400, Yassine Oudjana wrote: > From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> > > Make the driver get needed regulators on probe and enable/disable > them on runtime PM callbacks. > > Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> Have you seen this ? https://github.com/ArduCAM/IMX519_AK7375/blob/main/AK7375/0002-media-i2c-ak7375-driver-add-optional-regulator-suppo.patch#L172 It claims + * Initialisation delay between VDD low->high and the moment + * when the i2c command is available. + * From the datasheet, it should be 10ms + 2ms (max power + * up sequence duration) 10ms seems like a long time, it would be nice to have the datasheet to cross-check. Thanks j > --- > Changes since v1: > - Reorganize variable declaration > - Change the power-on delay range to 3000-3500 microseconds. > > drivers/media/i2c/ak7375.c | 39 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/drivers/media/i2c/ak7375.c b/drivers/media/i2c/ak7375.c > index 40b1a4aa846c..c2b2542a0056 100644 > --- a/drivers/media/i2c/ak7375.c > +++ b/drivers/media/i2c/ak7375.c > @@ -6,6 +6,7 @@ > #include <linux/i2c.h> > #include <linux/module.h> > #include <linux/pm_runtime.h> > +#include <linux/regulator/consumer.h> > #include <media/v4l2-ctrls.h> > #include <media/v4l2-device.h> > > @@ -23,17 +24,32 @@ > */ > #define AK7375_CTRL_STEPS 64 > #define AK7375_CTRL_DELAY_US 1000 > +/* > + * The vcm takes around 3 ms to power on and start taking > + * I2C messages. This value was found experimentally due to > + * lack of documentation. > + */ > +#define AK7375_POWER_DELAY_US 3000 > > #define AK7375_REG_POSITION 0x0 > #define AK7375_REG_CONT 0x2 > #define AK7375_MODE_ACTIVE 0x0 > #define AK7375_MODE_STANDBY 0x40 > > +static const char * const ak7375_supply_names[] = { > + "vdd", > + "vio", > +}; > + > +#define AK7375_NUM_SUPPLIES ARRAY_SIZE(ak7375_supply_names) > + > /* ak7375 device structure */ > struct ak7375_device { > struct v4l2_ctrl_handler ctrls_vcm; > struct v4l2_subdev sd; > struct v4l2_ctrl *focus; > + struct regulator_bulk_data supplies[AK7375_NUM_SUPPLIES]; > + > /* active or standby mode */ > bool active; > }; > @@ -133,12 +149,24 @@ static int ak7375_probe(struct i2c_client *client) > { > struct ak7375_device *ak7375_dev; > int ret; > + int i; > > ak7375_dev = devm_kzalloc(&client->dev, sizeof(*ak7375_dev), > GFP_KERNEL); > if (!ak7375_dev) > return -ENOMEM; > > + for (i = 0; i < AK7375_NUM_SUPPLIES; i++) > + ak7375_dev->supplies[i].supply = ak7375_supply_names[i]; > + > + ret = devm_regulator_bulk_get(&client->dev, AK7375_NUM_SUPPLIES, > + ak7375_dev->supplies); > + if (ret) { > + dev_err(&client->dev, "Failed to get regulators: %pe", > + ERR_PTR(ret)); > + return ret; > + } > + > v4l2_i2c_subdev_init(&ak7375_dev->sd, client, &ak7375_ops); > ak7375_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > ak7375_dev->sd.internal_ops = &ak7375_int_ops; > @@ -210,6 +238,10 @@ static int __maybe_unused ak7375_vcm_suspend(struct device *dev) > if (ret) > dev_err(dev, "%s I2C failure: %d\n", __func__, ret); > > + ret = regulator_bulk_disable(AK7375_NUM_SUPPLIES, ak7375_dev->supplies); > + if (ret) > + return ret; > + > ak7375_dev->active = false; > > return 0; > @@ -230,6 +262,13 @@ static int __maybe_unused ak7375_vcm_resume(struct device *dev) > if (ak7375_dev->active) > return 0; > > + ret = regulator_bulk_enable(AK7375_NUM_SUPPLIES, ak7375_dev->supplies); > + if (ret) > + return ret; > + > + /* Wait for vcm to become ready */ > + usleep_range(AK7375_POWER_DELAY_US, AK7375_POWER_DELAY_US + 500); > + > ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_CONT, > AK7375_MODE_ACTIVE, 1); > if (ret) { > -- > 2.37.0 >