Trying to convert every driver used by ipq806x to parent_data api, I notice RPM was still using pxo_board clk. pxo and pxo_board are the same clock and are defined just to handle old clock definition. It was discovered that rpm is the last driver using pxo_board instead of pxo. While updating the rpm driver I notice the documentation was also wrong, so this series also fix that. Christian Marangi (5): dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc ARM: DTS: qcom: fix dtbs_check warning with new rpmcc clocks clk: qcom: clk-rpm: convert to parent_data API ARM: dts: qcom: add pxo/cxo clock-output-names for ipq8064 clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxo .../devicetree/bindings/clock/qcom,rpmcc.yaml | 77 ++++++++++++++++++- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 + arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 + arch/arm/boot/dts/qcom-msm8660.dtsi | 4 +- drivers/clk/qcom/clk-rpm.c | 24 ++++-- drivers/clk/qcom/gcc-ipq806x.c | 8 -- 6 files changed, 98 insertions(+), 21 deletions(-) -- 2.36.1
