Convert clk-rpm driver to parent_data API and change parent names to cxo and pxo instead of the board variant as pxo_board is an ancient name and pxo should be used instead. Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> --- drivers/clk/qcom/clk-rpm.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c index a18811c38018..d45a8b0fc97c 100644 --- a/drivers/clk/qcom/clk-rpm.c +++ b/drivers/clk/qcom/clk-rpm.c @@ -23,6 +23,14 @@ #define QCOM_RPM_SCALING_ENABLE_ID 0x2 #define QCOM_RPM_XO_MODE_ON 0x2 +static const struct clk_parent_data gcc_pxo[] = { + { .fw_name = "pxo", .name = "pxo" }, +}; + +static const struct clk_parent_data gcc_cxo[] = { + { .fw_name = "cxo", .name = "cxo" }, +}; + #define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \ static struct clk_rpm _platform##_##_active; \ static struct clk_rpm _platform##_##_name = { \ @@ -32,8 +40,8 @@ .hw.init = &(struct clk_init_data){ \ .ops = &clk_rpm_ops, \ .name = #_name, \ - .parent_names = (const char *[]){ "pxo_board" }, \ - .num_parents = 1, \ + .parent_data = gcc_pxo, \ + .num_parents = ARRAY_SIZE(gcc_pxo), \ }, \ }; \ static struct clk_rpm _platform##_##_active = { \ @@ -44,8 +52,8 @@ .hw.init = &(struct clk_init_data){ \ .ops = &clk_rpm_ops, \ .name = #_active, \ - .parent_names = (const char *[]){ "pxo_board" }, \ - .num_parents = 1, \ + .parent_data = gcc_pxo, \ + .num_parents = ARRAY_SIZE(gcc_pxo), \ }, \ } @@ -56,8 +64,8 @@ .hw.init = &(struct clk_init_data){ \ .ops = &clk_rpm_xo_ops, \ .name = #_name, \ - .parent_names = (const char *[]){ "cxo_board" }, \ - .num_parents = 1, \ + .parent_data = gcc_cxo, \ + .num_parents = ARRAY_SIZE(gcc_cxo), \ }, \ } @@ -68,8 +76,8 @@ .hw.init = &(struct clk_init_data){ \ .ops = &clk_rpm_fixed_ops, \ .name = #_name, \ - .parent_names = (const char *[]){ "pxo" }, \ - .num_parents = 1, \ + .parent_data = gcc_pxo, \ + .num_parents = ARRAY_SIZE(gcc_pxo), \ }, \ } -- 2.36.1