On Tue, 2022-07-05 at 16:39 +0800, Rex-BC Chen wrote:
> On Tue, 2022-07-05 at 13:21 +0800, CK Hu wrote:
> > Hi, Bo-Chen:
> >
> > On Fri, 2022-07-01 at 11:58 +0800, Bo-Chen Chen wrote:
> > > Dp_intf supports YUV422 as output format. In MT8195 Chrome
> > > project,
> > > YUV422 output format is used for 4K resolution.
> > >
> > > To support this, it is also needed to support color format
> > > transfer.
> > > Color format transfer is a new feature for both dpi and dpintf of
> > > MT8195.
> > >
> > > The input format could be RGB888 and output format for dp_intf
> > > should
> > > be
> > > YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to update
> > > the
> > > DPI_MATRIX_SET register depending on the color format.
> > >
> > > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> > > Reviewed-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno@xxxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_dpi.c | 61
> > > +++++++++++++++++++++
> > > ----
> > > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 6 +++
> > > 2 files changed, 59 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > index 3085033becbd..0a604bf68b1b 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > @@ -54,7 +54,8 @@ enum mtk_dpi_out_channel_swap {
> > > };
> > >
> > > enum mtk_dpi_out_color_format {
> > > - MTK_DPI_COLOR_FORMAT_RGB
> > > + MTK_DPI_COLOR_FORMAT_RGB,
> > > + MTK_DPI_COLOR_FORMAT_YCBCR_422
> > > };
> > >
> > > struct mtk_dpi {
> > > @@ -122,6 +123,7 @@ struct mtk_dpi_yc_limit {
> > > * @num_output_fmts: Quantity of supported output formats.
> > > * @is_ck_de_pol: Support CK/DE polarity.
> > > * @swap_input_support: Support input swap function.
> > > + * @color_fmt_trans_support: Enable color format transfer.
> > > * @dimension_mask: Mask used for HWIDTH, HPORCH, VSYNC_WIDTH
> > > and
> > > VSYNC_PORCH
> > > * (no shift).
> > > * @hvsize_mask: Mask of HSIZE and VSIZE mask (no shift).
> > > @@ -138,6 +140,7 @@ struct mtk_dpi_conf {
> > > u32 num_output_fmts;
> > > bool is_ck_de_pol;
> > > bool swap_input_support;
> > > + bool color_fmt_trans_support;
> > > u32 dimension_mask;
> > > u32 hvsize_mask;
> > > u32 channel_swap_shift;
> > > @@ -406,15 +409,54 @@ static void
> > > mtk_dpi_config_disable_edge(struct
> > > mtk_dpi *dpi)
> > > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0,
> > > EDGE_SEL_EN);
> > > }
> > >
> > > +static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi,
> > > + enum mtk_dpi_out_color_format format)
> >
> > The format would only be MTK_DPI_COLOR_FORMAT_YCBCR_422, so drop
> > the
> > parameter format.
> >
> > > +{
> > > + u32 matrix_sel;
> > > +
> > > + if (!dpi->conf->color_fmt_trans_support) {
> >
> > Only YUV format would call this function, and I think YUV support
> > would
> > imply that color_fmt_trans_support is true. So drop
> > color_fmt_trans_support.
> >
> > > + dev_info(dpi->dev, "matrix_sel is not supported.\n");
> > > + return;
> > > + }
> > > +
> > > + switch (format) {
> > > + case MTK_DPI_COLOR_FORMAT_YCBCR_422:
> > > + /*
> > > + * If height is smaller than 720, we need to use
> > > RGB_TO_BT601
> > > + * to transfer to yuv422. Otherwise, we use
> > > RGB_TO_JPEG.
> > > + */
> > > + if (dpi->mode.hdisplay <= 720)
> > > + matrix_sel = MATRIX_SEL_RGB_TO_BT601;
> > > + else
> > > + matrix_sel = MATRIX_SEL_RGB_TO_JPEG;
> > > + break;
> > > + default:
> > > + matrix_sel = MATRIX_SEL_RGB_TO_JPEG;
> > > + break;
> > > + }
> > > + mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel,
> > > INT_MATRIX_SEL_MASK);
> >
> > it seems that we could drop this function and write register as:
> >
> > mtk_dpi_mask(dpi, DPI_MATRIX_SET, dpi->mode.hdisplay <= 720
> > ? MATRIX_SEL_RGB_TO_BT601 : MATRIX_SEL_RGB_TO_JPEG,
> > INT_MATRIX_SEL_MASK);
> >
>
> Hello CK,
>
> ok, I will drop this function and config.
>
> > > +}
> > > +
> > > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > > enum mtk_dpi_out_color_format
> > > format)
> > > {
> > > - /* only support RGB888 */
> > > - mtk_dpi_config_yuv422_enable(dpi, false);
> > > - mtk_dpi_config_csc_enable(dpi, false);
> > > - if (dpi->conf->swap_input_support)
> > > - mtk_dpi_config_swap_input(dpi, false);
> > > - mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > > + if (format == MTK_DPI_COLOR_FORMAT_YCBCR_422) {
> > > + mtk_dpi_config_yuv422_enable(dpi, true);
> > > + mtk_dpi_config_csc_enable(dpi, true);
> > > + mtk_dpi_matrix_sel(dpi, format);
> > > + if (dpi->conf->swap_input_support)
> >
> > This would never be true because only MT8195 support
> > MTK_DPI_COLOR_FORMAT_YCBCR_422 and swap_input_support of MT8195 is
> > false.
> >
>
> I think for mt8195, it should be support output format yuv422 and
> rgb888.
>
> please refer to [16/16]
>
> +static const u32 mt8195_output_fmts[] = {
> + MEDIA_BUS_FMT_RGB888_1X24,
> + MEDIA_BUS_FMT_YUYV8_1X16,
> +};
>
> BRs,
> Bo-Chen
Hello CK,
Sorry, I misunderstand your comments.
ok, I will drop this.
BRs,
Bo-Chen
> > Regards,
> > CK
> >
> > > + mtk_dpi_config_swap_input(dpi, true);
> > > + else
> > > + dev_warn(dpi->dev,
> > > + "Failed to swap input, hw is not
> > > supported.\n");
> > > + mtk_dpi_config_channel_swap(dpi,
> > > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > > + } else {
> > > + mtk_dpi_config_yuv422_enable(dpi, false);
> > > + mtk_dpi_config_csc_enable(dpi, false);
> > > + if (dpi->conf->swap_input_support)
> > > + mtk_dpi_config_swap_input(dpi, false);
> > > + mtk_dpi_config_channel_swap(dpi,
> > > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > > + }
> > > }
> > >
> > > static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
> > > @@ -649,7 +691,10 @@ static int
> > > mtk_dpi_bridge_atomic_check(struct
> > > drm_bridge *bridge,
> > > dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> > > dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> > > dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > > + if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> > > + dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422;
> > > + else
> > > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > index 3a02fabe1662..9ce300313f3e 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > @@ -217,4 +217,10 @@
> > >
> > > #define EDGE_SEL_EN BIT(5)
> > > #define H_FRE_2N BIT(25)
> > > +
> > > +#define DPI_MATRIX_SET 0xB4
> > > +#define INT_MATRIX_SEL_MASK GENMASK(4, 0)
> > > +#define MATRIX_SEL_RGB_TO_JPEG 0
> > > +#define MATRIX_SEL_RGB_TO_BT601 2
> > > +
> > > #endif /* __MTK_DPI_REGS_H */
> >
> >
>
>
