Re: [PATCH v15 13/16] drm/mediatek: dpi: Add YUV422 output support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2022-07-05 at 13:21 +0800, CK Hu wrote:
> Hi, Bo-Chen:
> 
> On Fri, 2022-07-01 at 11:58 +0800, Bo-Chen Chen wrote:
> > Dp_intf supports YUV422 as output format. In MT8195 Chrome project,
> > YUV422 output format is used for 4K resolution.
> > 
> > To support this, it is also needed to support color format
> > transfer.
> > Color format transfer is a new feature for both dpi and dpintf of
> > MT8195.
> > 
> > The input format could be RGB888 and output format for dp_intf
> > should
> > be
> > YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to update
> > the
> > DPI_MATRIX_SET register depending on the color format.
> > 
> > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@xxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dpi.c      | 61 +++++++++++++++++++++
> > ----
> >  drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  6 +++
> >  2 files changed, 59 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 3085033becbd..0a604bf68b1b 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -54,7 +54,8 @@ enum mtk_dpi_out_channel_swap {
> >  };
> >  
> >  enum mtk_dpi_out_color_format {
> > -	MTK_DPI_COLOR_FORMAT_RGB
> > +	MTK_DPI_COLOR_FORMAT_RGB,
> > +	MTK_DPI_COLOR_FORMAT_YCBCR_422
> >  };
> >  
> >  struct mtk_dpi {
> > @@ -122,6 +123,7 @@ struct mtk_dpi_yc_limit {
> >   * @num_output_fmts: Quantity of supported output formats.
> >   * @is_ck_de_pol: Support CK/DE polarity.
> >   * @swap_input_support: Support input swap function.
> > + * @color_fmt_trans_support: Enable color format transfer.
> >   * @dimension_mask: Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and
> > VSYNC_PORCH
> >   *		    (no shift).
> >   * @hvsize_mask: Mask of HSIZE and VSIZE mask (no shift).
> > @@ -138,6 +140,7 @@ struct mtk_dpi_conf {
> >  	u32 num_output_fmts;
> >  	bool is_ck_de_pol;
> >  	bool swap_input_support;
> > +	bool color_fmt_trans_support;
> >  	u32 dimension_mask;
> >  	u32 hvsize_mask;
> >  	u32 channel_swap_shift;
> > @@ -406,15 +409,54 @@ static void
> > mtk_dpi_config_disable_edge(struct
> > mtk_dpi *dpi)
> >  		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0,
> > EDGE_SEL_EN);
> >  }
> >  
> > +static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi,
> > +			       enum mtk_dpi_out_color_format format)
> 
> The format would only be MTK_DPI_COLOR_FORMAT_YCBCR_422, so drop the
> parameter format.
> 
> > +{
> > +	u32 matrix_sel;
> > +
> > +	if (!dpi->conf->color_fmt_trans_support) {
> 
> Only YUV format would call this function, and I think YUV support
> would
> imply that color_fmt_trans_support is true. So drop
> color_fmt_trans_support.
> 
> > +		dev_info(dpi->dev, "matrix_sel is not supported.\n");
> > +		return;
> > +	}
> > +
> > +	switch (format) {
> > +	case MTK_DPI_COLOR_FORMAT_YCBCR_422:
> > +		/*
> > +		 * If height is smaller than 720, we need to use
> > RGB_TO_BT601
> > +		 * to transfer to yuv422. Otherwise, we use
> > RGB_TO_JPEG.
> > +		 */
> > +		if (dpi->mode.hdisplay <= 720)
> > +			matrix_sel = MATRIX_SEL_RGB_TO_BT601;
> > +		else
> > +			matrix_sel = MATRIX_SEL_RGB_TO_JPEG;
> > +		break;
> > +	default:
> > +		matrix_sel = MATRIX_SEL_RGB_TO_JPEG;
> > +		break;
> > +	}
> > +	mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel,
> > INT_MATRIX_SEL_MASK);
> 
> it seems that we could drop this function and write register as:
> 
> mtk_dpi_mask(dpi, DPI_MATRIX_SET, dpi->mode.hdisplay <= 720
> ? MATRIX_SEL_RGB_TO_BT601 : MATRIX_SEL_RGB_TO_JPEG,
> INT_MATRIX_SEL_MASK);
> 

Hello CK,

ok, I will drop this function and config.

> > +}
> > +
> >  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> >  					enum mtk_dpi_out_color_format
> > format)
> >  {
> > -	/* only support RGB888 */
> > -	mtk_dpi_config_yuv422_enable(dpi, false);
> > -	mtk_dpi_config_csc_enable(dpi, false);
> > -	if (dpi->conf->swap_input_support)
> > -		mtk_dpi_config_swap_input(dpi, false);
> > -	mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > +	if (format == MTK_DPI_COLOR_FORMAT_YCBCR_422) {
> > +		mtk_dpi_config_yuv422_enable(dpi, true);
> > +		mtk_dpi_config_csc_enable(dpi, true);
> > +		mtk_dpi_matrix_sel(dpi, format);
> > +		if (dpi->conf->swap_input_support)
> 
> This would never be true because only MT8195 support
> MTK_DPI_COLOR_FORMAT_YCBCR_422 and swap_input_support of MT8195 is
> false.
> 

I think for mt8195, it should be support output format yuv422 and
rgb888.

please refer to [16/16]

+static const u32 mt8195_output_fmts[] = {
+	MEDIA_BUS_FMT_RGB888_1X24,
+	MEDIA_BUS_FMT_YUYV8_1X16,
+};

BRs,
Bo-Chen
> Regards,
> CK
> 
> > +			mtk_dpi_config_swap_input(dpi, true);
> > +		else
> > +			dev_warn(dpi->dev,
> > +				 "Failed to swap input, hw is not
> > supported.\n");
> > +		mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > +	} else {
> > +		mtk_dpi_config_yuv422_enable(dpi, false);
> > +		mtk_dpi_config_csc_enable(dpi, false);
> > +		if (dpi->conf->swap_input_support)
> > +			mtk_dpi_config_swap_input(dpi, false);
> > +		mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > +	}
> >  }
> >  
> >  static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
> > @@ -649,7 +691,10 @@ static int mtk_dpi_bridge_atomic_check(struct
> > drm_bridge *bridge,
> >  	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> >  	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> >  	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > -	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > +	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> > +		dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422;
> > +	else
> > +		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> >  
> >  	return 0;
> >  }
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > index 3a02fabe1662..9ce300313f3e 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > @@ -217,4 +217,10 @@
> >  
> >  #define EDGE_SEL_EN			BIT(5)
> >  #define H_FRE_2N			BIT(25)
> > +
> > +#define DPI_MATRIX_SET		0xB4
> > +#define INT_MATRIX_SEL_MASK		GENMASK(4, 0)
> > +#define MATRIX_SEL_RGB_TO_JPEG		0
> > +#define MATRIX_SEL_RGB_TO_BT601		2
> > +
> >  #endif /* __MTK_DPI_REGS_H */
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux