Currently kernel NCSI driver only supports the "VLAN + non-VLAN" mode
(Mode #2), but this mode is an optional mode [1] defined in NCSI spec
and some NCSI devices like Intel E810 Network Adapter [2] does not
support that mode. This patchset adds a new "ncsi,vlan-mode" device
tree property for configuring the VLAN mode of NCSI device.
[1] Table 58 - VLAN Enable Modes
https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.0.0.pdf
[2] 12.6.5.4.3 VLAN
https://cdrdv2.intel.com/v1/dl/getContent/613875
v2:
- Fix indentation
Jiaqing Zhao (6):
net/ncsi: Fix value of NCSI_CAP_VLAN_ANY
net/ncsi: Rename NCSI_CAP_VLAN_NO to NCSI_CAP_VLAN_FILTERED
net/ncsi: Enable VLAN filtering when callback is registered
ftgmac100: Remove enable NCSI VLAN filtering
dt-bindings: net: Add NCSI bindings
net/ncsi: Support VLAN mode configuration
.../devicetree/bindings/net/ncsi.yaml | 34 ++++++++++++++
MAINTAINERS | 2 +
drivers/net/ethernet/faraday/ftgmac100.c | 3 --
include/dt-bindings/net/ncsi.h | 15 ++++++
net/ncsi/internal.h | 5 +-
net/ncsi/ncsi-manage.c | 46 ++++++++++++++++---
6 files changed, 93 insertions(+), 12 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ncsi.yaml
create mode 100644 include/dt-bindings/net/ncsi.h
--
2.34.1
