Re: [RFC v2 1/2] dt-bindings: usb: dwc3: Add support for multiport related properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 27, 2022 at 04:30:34PM +0530, Harsh Agarwal wrote:
> 
> On 5/26/2022 6:10 PM, Rob Herring wrote:
> > On Thu, 26 May 2022 15:43:48 +0530, Harsh Agarwal wrote:
> > > Added support for multiport, mport, num-ssphy and num-hsphy
> > > properties. These properties are used to support devices having
> > > a multiport controller.
> > > 
> > > Signed-off-by: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
> > > ---
> > >   .../devicetree/bindings/usb/snps,dwc3.yaml         | 55 ++++++++++++++++++++++
> > >   1 file changed, 55 insertions(+)
> > > 
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > 
> > yamllint warnings/errors:
> > ./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:366:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
> > ./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:367:10: [warning] wrong indentation: expected 11 but found 9 (indentation)
> > ./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:369:11: [warning] wrong indentation: expected 11 but found 10 (indentation)
> > 
> > dtschema/dtc warnings/errors:
> > Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:86.27-89.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@1: node has a unit name, but no reg or ranges property
> > Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:91.27-93.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@2: node has a unit name, but no reg or ranges property
> > Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:95.27-97.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@3: node has a unit name, but no reg or ranges property
> > Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:99.27-101.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@4: node has a unit name, but no reg or ranges property
> > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.example.dtb: usb@4a000000: multiport: 'mport' is a required property
> > 	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> > 
> > doc reference errors (make refcheckdocs):
> > 
> > See https://patchwork.ozlabs.org/patch/
> > 
> > This check can fail if there are any dependencies. The base for a patch
> > series is generally the most recent rc1.
> > 
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> > 
> > pip3 install dtschema --upgrade
> > 
> > Please check and re-submit.
> Indentation error I have rectified in my RFC v2.
> Regarding below warnings
> 
> "Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:86.27-89.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@1: node has a unit name, but no reg or ranges property"
> Here the mport expects no "reg" or ranges" property as of now. Only thing that is mandated is either the USB-PHY phandles using "usb-phy" or the Generic PHY declaration using "phy" and "phy-names"
> Can you please suggest to mask these warnings or do I need to add something else ?

A unit-address requires 'reg' or 'ranges' and vice-versa. So you need 
'reg'.

However, usb-hcd.yaml already defines what child nodes are for USB 
hosts. Whatever you do here needs to be compatible with that.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux