Re: [RFC v2 1/2] dt-bindings: usb: dwc3: Add support for multiport related properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 26 May 2022 15:43:48 +0530, Harsh Agarwal wrote:
> Added support for multiport, mport, num-ssphy and num-hsphy
> properties. These properties are used to support devices having
> a multiport controller.
> 
> Signed-off-by: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/usb/snps,dwc3.yaml         | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:366:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:367:10: [warning] wrong indentation: expected 11 but found 9 (indentation)
./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:369:11: [warning] wrong indentation: expected 11 but found 10 (indentation)

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:86.27-89.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:91.27-93.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:95.27-97.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@3: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/snps,dwc3.example.dts:99.27-101.15: Warning (unit_address_vs_reg): /example-2/usb@4a000000/multiport/mport@4: node has a unit name, but no reg or ranges property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.example.dtb: usb@4a000000: multiport: 'mport' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux