The I2C pins on the SoCFPGA platforms do not go through a GPIO module, thus cannot be recovered by the default method of by doing a GPIO access. Only a reset of the I2C IP block can a recovery be successful. Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-core.h | 3 ++- drivers/i2c/busses/i2c-designware-master.c | 19 +++++++++++++++++-- drivers/i2c/busses/i2c-designware-platdrv.c | 2 ++ 3 files changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 70b80e710990..4e997e381fb6 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -303,7 +303,8 @@ struct dw_i2c_dev { #define MODEL_MSCC_OCELOT BIT(8) #define MODEL_BAIKAL_BT1 BIT(9) #define MODEL_AMD_NAVI_GPU BIT(10) -#define MODEL_MASK GENMASK(11, 8) +#define MODEL_SOCFPGA BIT(11) +#define MODEL_MASK GENMASK(12, 8) /* * Enable UCSI interrupt by writing 0xd at register diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 44a94b225ed8..333ad17b967d 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -813,12 +813,29 @@ static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap) i2c_dw_init_master(dev); } +static int i2c_custom_scl_recovery(struct i2c_adapter *adap) +{ + i2c_dw_prepare_recovery(adap); + i2c_dw_unprepare_recovery(adap); + return 0; +} + static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) { struct i2c_bus_recovery_info *rinfo = &dev->rinfo; struct i2c_adapter *adap = &dev->adapter; struct gpio_desc *gpio; + switch (dev->flags & MODEL_MASK) { + case MODEL_SOCFPGA: + rinfo->recover_bus = i2c_custom_scl_recovery; + break; + default: + rinfo->recover_bus = i2c_generic_scl_recovery; + break; + } + adap->bus_recovery_info = rinfo; + gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH); if (IS_ERR_OR_NULL(gpio)) return PTR_ERR_OR_ZERO(gpio); @@ -830,10 +847,8 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) return PTR_ERR(gpio); rinfo->sda_gpiod = gpio; - rinfo->recover_bus = i2c_generic_scl_recovery; rinfo->prepare_recovery = i2c_dw_prepare_recovery; rinfo->unprepare_recovery = i2c_dw_unprepare_recovery; - adap->bus_recovery_info = rinfo; dev_info(dev->dev, "running with gpio recovery mode! scl%s", rinfo->sda_gpiod ? ",sda" : ""); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 70ade5306e45..92dfe3456ca7 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -153,6 +153,8 @@ static const struct of_device_id dw_i2c_of_match[] = { { .compatible = "snps,designware-i2c", }, { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, + { .compatible = "intel,socfpga-i2c", .data = (void *)MODEL_SOCFPGA }, + {}, }; MODULE_DEVICE_TABLE(of, dw_i2c_of_match); -- 2.25.1