Modified the units after application of scale from 100*m/s^2 to m/s^2, since the units in the ABI documents are m/s^2. Add supports for the BMI085 accelerometer. Add supports for the BMI090L accelerometer. Make it possible to config scales. Change in V3: Use FIELD_GET for checking register range. Reorder the chip info and dt-bindings alphabetical. Add of_id_table. Modify the logic of loading sensor chip info. If the device was found in the table but the device tree binding is different, the driver will carry on with the detected chip with a warning. If no matching device was found, the driver load the binding chip. LI Qingwu (6): iio: accel: bmi088: Modified the scale calculate iio: accel: bmi088: Make it possible to config scales iio: accel: bmi088: modified the device name iio: accel: bmi088: Add support for bmi085 accel iio: accel: bmi088: Add support for bmi090l accel dt-bindings: iio: accel: Add bmi085 and bmi090l bindings .../bindings/iio/accel/bosch,bmi088.yaml | 2 + drivers/iio/accel/bmi088-accel-core.c | 96 +++++++++++++++---- drivers/iio/accel/bmi088-accel-spi.c | 17 +++- drivers/iio/accel/bmi088-accel.h | 9 +- 4 files changed, 100 insertions(+), 24 deletions(-) -- 2.25.1
