Re: [PATCH V4 3/5] arm64: dts: nuvoton: Add initial support for MA35D1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/05/2022 07:53, Jacky Huang wrote:
> 
> On 2022/5/13 下午 02:57, Krzysztof Kozlowski wrote:
>> On 13/05/2022 08:48, Jacky Huang wrote:
>>>>> +
>>>>> +	hxt_24m: hxt_24mhz {
>>>> No underscores in node name. Generic node names, so "clock-X" or
>>>> "clock-some-suffix"
>>> OK, I will modify it as
>>>    hxt-24m: hxt-24mhz
>> No, it is not a generic node name. Please read my reply again.
> 
> I  would modify it as
> 
>     clock-hxt: clock-hspd-ext-crystal
> 
> 
>>
>>>>> +		compatible = "fixed-clock";
>>>>> +		#clock-cells = <0>;
>>>>> +		clock-frequency = <24000000>;
>>>> This does not look like property of SoC. Where is this clock defined? In
>>>> the SoC or on the board?
>>> It's an external crystal on the board.
>>> I add this node, because it's the clock source of clock controller.
>>> It always present on all ma35d1 boards.
>>>

Then such clock is not a property of a SoC, but a board. Feel free to
simplify DTS by storing most of the clock node in DTSI, but frequency
should be defined by each board.



Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux