Re: [PATCH V4 3/5] arm64: dts: nuvoton: Add initial support for MA35D1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/05/2022 05:25, Jacky Huang wrote:
> Add the initial device tree files for Nuvoton MA35D1 Soc.
> 
> Signed-off-by: Jacky Huang <ychuang3@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/Makefile               |   1 +
>  arch/arm64/boot/dts/nuvoton/Makefile       |   2 +
>  arch/arm64/boot/dts/nuvoton/ma35d1-evb.dts |  24 +++++
>  arch/arm64/boot/dts/nuvoton/ma35d1.dtsi    | 120 +++++++++++++++++++++
>  4 files changed, 147 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/nuvoton/Makefile
>  create mode 100644 arch/arm64/boot/dts/nuvoton/ma35d1-evb.dts
>  create mode 100644 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 1ba04e31a438..7b107fa7414b 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -19,6 +19,7 @@ subdir-y += lg
>  subdir-y += marvell
>  subdir-y += mediatek
>  subdir-y += microchip
> +subdir-y += nuvoton
>  subdir-y += nvidia
>  subdir-y += qcom
>  subdir-y += realtek
> diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile
> new file mode 100644
> index 000000000000..e1e0c466bf5e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nuvoton/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_NUVOTON) += ma35d1-evb.dtb
> diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-evb.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-evb.dts
> new file mode 100644
> index 000000000000..95f0facb0476
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-evb.dts
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Device Tree Source for MA35D1 Evaluation Board (EVB)
> + *
> + * Copyright (C) 2022 Nuvoton Technology Corp.
> + */
> +
> +/dts-v1/;
> +#include "ma35d1.dtsi"
> +
> +/ {
> +	model = "Nuvoton MA35D1-EVB";
> +	compatible = "nuvoton,ma35d1-evb", "nuvoton,ma35d1";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0x0 0x10000000>;
> +	};
> +};
> +


.git/rebase-apply/patch:60: new blank line at EOF.

+

warning: 1 line adds whitespace errors.



> diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
> new file mode 100644
> index 000000000000..7212f8de6906
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Copyright (c) 2022 Nuvoton Technology Corp.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
> +
> +/ {
> +	compatible = "nuvoton,ma35d1";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x1>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		L2_0: l2-cache0 {
> +			compatible = "cache";
> +			cache-level = <2>;
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	hxt_24m: hxt_24mhz {

No underscores in node name. Generic node names, so "clock-X" or
"clock-some-suffix"

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;

This does not look like property of SoC. Where is this clock defined? In
the SoC or on the board?

> +		clock-output-names = "HXT_24MHz";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>;
> +		clock-frequency = <12000000>;
> +	};
> +
> +	sys: system-controller@40460000 {
> +		compatible = "nuvoton,ma35d1-sys", "syscon", "simple-mfd";

Why is this a simple-mfd if there are no children here? What do you want
to instantiate here?

Where is the nuvoton,ma35d1-sys compatible documented?

> +		reg = <0x0 0x40460000 0x0 0x400>;
> +	};
> +
> +	reset: reset-controller {
> +		compatible = "nuvoton,ma35d1-reset";

Also not documented.

> +		nuvoton,ma35d1-sys = <&sys>;
> +		#reset-cells = <1>;
> +	};
> +
> +	clk: clock-controller@40460200 {
> +		compatible = "nuvoton,ma35d1-clk";
> +		reg = <0x0 0x40460200 0x0 0x100>;
> +		#clock-cells = <1>;
> +		clocks = <&hxt_24m>;
> +		clock-names = "HXT_24MHz";

Please test your DTS with make dtbs_check.

Don't send DTS which does not pass the checks. It is unnecessary use of
reviewers time when the same job can be done by automated tools.

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux