Hello, this patchset adds the possibility to specify a PWM polarity inversion for i.MX8M. The pwm-imx27 driver already supports this in the 3rd pwm-cells, but the DT for imx8m so far only set #pwm-cells=<2>. Add support by setting #pwm-cells=<3> and adding the (default) normal (0) polarity to all boards. make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/imx-pwm.yaml was used to get all boards. Best regards, Alexander Markus Niebel (4): arm64: dt: imx8mq: support pwm polarity inversion arm64: dt: imx8mm: support pwm polarity inversion arm64: dt: imx8mn: support pwm polarity inversion arm64: dt: imx8mp: support pwm polarity inversion .../boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++---- 8 files changed, 20 insertions(+), 20 deletions(-) -- 2.25.1
