The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter. The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC. The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support. Link: [1] https://www.renesas.com/us/en/document/mah/rzn1d-group-rzn1s-group-rzn1l-group-users-manual-r-engine-and-ethernet-peripherals ----- Changes in V2: - PCS: - Fix Reverse Christmas tree declaration - Removed stray newline - Add PCS remove function and disable clocks in them - Fix miic_validate function to return correct values - Split PCS CONV_MODE definition - Reordered phylink_pcs_ops in definition order - Remove interface setting in miic_link_up - Remove useless checks for invalid interface/speed and error prints - Replace phylink_pcs_to_miic_port macro by a static function - Add comment in miic_probe about platform_set_drvdata - Bindings: - Fix wrong path for mdio.yaml $ref - Fix yamllint errors - Tag driver: - Squashed commit that added tag value with tag driver - Add BUILD_BUG_ON for tag size - Split control_data2 in 2 16bits values - Switch: - Use .phylink_get_caps instead of .phylink_validate and fill supported_interface correctly - Use fixed size (ETH_GSTRING_LEN) string for stats and use memcpy - Remove stats access locking since RTNL lock is used in upper layers - Check for non C45 addresses in mdio_read/write and return -EOPNOTSUPP - Add get_eth_mac_stats, get_eth_mac_ctrl_stat, get_rmon_stats - Fix a few indentation problems - Remove reset callback from MDIO bus operation - Add phy/mac/rmon stats - Add get_rmon_stat to dsa_ops Clément Léger (12): net: dsa: add support for ethtool get_rmon_stats() net: dsa: add Renesas RZ/N1 switch tag driver dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter net: pcs: add Renesas MII converter driver dt-bindings: net: dsa: add bindings for Renesas RZ/N1 Advanced 5 port switch net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver net: dsa: rzn1-a5psw: add statistics support net: dsa: rzn1-a5psw: add FDB support ARM: dts: r9a06g032: describe MII converter ARM: dts: r9a06g032: describe GMAC2 ARM: dts: r9a06g032: describe switch MAINTAINERS: add Renesas RZ/N1 switch related driver entry .../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 132 +++ .../bindings/net/pcs/renesas,rzn1-miic.yaml | 157 +++ MAINTAINERS | 11 + arch/arm/boot/dts/r9a06g032.dtsi | 63 + drivers/net/dsa/Kconfig | 9 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/rzn1_a5psw.c | 1055 +++++++++++++++++ drivers/net/dsa/rzn1_a5psw.h | 259 ++++ drivers/net/pcs/Kconfig | 7 + drivers/net/pcs/Makefile | 1 + drivers/net/pcs/pcs-rzn1-miic.c | 508 ++++++++ include/dt-bindings/net/pcs-rzn1-miic.h | 33 + include/linux/pcs-rzn1-miic.h | 18 + include/net/dsa.h | 5 + net/dsa/Kconfig | 7 + net/dsa/Makefile | 1 + net/dsa/slave.c | 13 + net/dsa/tag_rzn1_a5psw.c | 114 ++ 18 files changed, 2394 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml create mode 100644 Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml create mode 100644 drivers/net/dsa/rzn1_a5psw.c create mode 100644 drivers/net/dsa/rzn1_a5psw.h create mode 100644 drivers/net/pcs/pcs-rzn1-miic.c create mode 100644 include/dt-bindings/net/pcs-rzn1-miic.h create mode 100644 include/linux/pcs-rzn1-miic.h create mode 100644 net/dsa/tag_rzn1_a5psw.c -- 2.34.1
