Add bindings for Renesas RZ/N1 Advanced 5 port switch. This switch is present on Renesas RZ/N1 SoC and was probably provided by MoreThanIP. This company does not exists anymore and has been bought by Synopsys. Since this IP can't be find anymore in the Synospsy portfolio, lets use Renesas as the vendor compatible for this IP. Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx> --- .../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 132 ++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml new file mode 100644 index 000000000000..f0f6748e1f01 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Advanced 5 ports ethernet switch + +maintainers: + - Clément Léger <clement.leger@xxxxxxxxxxx> + +description: | + The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and + handles 4 ports + 1 CPU management port. + +allOf: + - $ref: dsa.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-a5psw + - const: renesas,rzn1-a5psw + + reg: + maxItems: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + clocks: + items: + - description: AHB clock used for the switch register interface + - description: Switch system clock + + clock-names: + items: + - const: hclk + - const: clk + +patternProperties: + "^ethernet-ports$": + type: object + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^(ethernet-)?port@[0-6]$": + type: object + description: Ethernet switch ports + + properties: + pcs-handle: + description: + phandle pointing to a PCS sub-node compatible with + renesas,rzn1-miic.yaml# + $ref: /schemas/types.yaml#/definitions/phandle + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + switch@44050000 { + compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw"; + reg = <0x44050000 0x10000>; + clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>; + clock-names = "hclk", "clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pins_mdio1>, <&pins_eth3>, <&pins_eth4>; + + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&switch0phy3>; + pcs-handle = <&mii_conv4>; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + pcs-handle = <&mii_conv3>; + }; + + port@4 { + reg = <4>; + ethernet = <&gmac1>; + label = "cpu"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>; + reset-delay-us = <15>; + clock-frequency = <2500000>; + + switch0phy1: ethernet-phy@1{ + reg = <1>; + }; + + switch0phy3: ethernet-phy@3{ + reg = <3>; + }; + }; + }; -- 2.34.1
