RZ/N1 SoC includes two MAC named GMACx that are compatible with the
"snps,dwmac" driver. GMAC1 is connected directly to the MII converter
port 1. GMAC2 however can be used as the MAC for the switch CPU
management port or can be muxed to be connected directly to the MII
converter port 2. This commit add description for the GMAC2 which will
be used by the switch description.
Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx>
---
arch/arm/boot/dts/r9a06g032.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index f2d474a236fd..54f0869e3c3c 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -200,6 +200,23 @@ nand_controller: nand-controller@40102000 {
status = "disabled";
};
+ gmac2: ethernet@44002000 {
+ compatible = "snps,dwmac";
+ reg = <0x44002000 0x2000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ clock-names = "stmmaceth";
+ clocks = <&sysctrl R9A06G032_HCLK_GMAC1>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
+ status = "disabled";
+ };
+
eth_miic: eth-miic@44030000 {
compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
#address-cells = <1>;
--
2.34.1
